Skip to main content
PLCXpert Wiki

Bently Nevada Accelerometers & Velocity Sensors — 200350 Series Compared

18 models · Bently Nevada

AI-generated · verify with manufacturer

Bently Nevada Accelerometers & Velocity Sensors — 200350 Series Compared: side-by-side comparison of 18 sibling models from the same product line. Every value is extracted from the manufacturer documentation indexed in this wiki; a field shown as "Not available" is absent from the published source. Use the product links for full specifications, maintenance notes and sourcing guidance.

Specification comparison table

Bently Nevada Accelerometers & Velocity Sensors — 200350 Series Compared — specifications compared across 18 models. Scroll horizontally to see all columns.
ModelProduct / Component TypeAgency Approvals OptionElectrical ConnectionHeightHex SizeMounting StudRelative HumidityTemperature
200350-00-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)00= ¼-28 SS w/ Brass tip, 0.5”100% relative, condensing, non-submergedRange
200350-00-00-01200350 Accelerometers01 = CSA, ATEX, IECExPosition Top1.65” (4.24 cm)11/16” (1.8 cm)00 = ¼-28 SS w/ Brass tip, 0.5”100% relative, condensing, non-submergedRange
200350-01-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)01 = ¼-28 to M6 x 1.00 Stainless Steel100% relative, condensing, non-submergedRange
200350-01-00-01200350 Accelerometers01 = CSA, ATEX, IECExPosition Top1.65” (4.24 cm)11/16” (1.8 cm)01 = ¼-28 to M6 x 1.00 Stainless Steel100% relative, condensing, non-submergedRange
200350-01-00-CN200350 AccelerometersCN=Country SpecificPosition Top1.65” (4.24 cm)11/16” (1.8 cm)01 = ¼-28 to M6 x 1.00 Stainless Steel100% relative, condensing, non-submergedRange
200350-02-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)02 = ¼-28 to M8 x 1.25 Stainless Steel100% relative, condensing, non-submergedRange
200350-02-00-01200350 Accelerometers01 = CSA, ATEX, IECExPosition Top1.65” (4.24 cm)11/16” (1.8 cm)02 = ¼-28 to M8 x 1.25 Stainless Steel100% relative, condensing, non-submergedRange
200350-02-00-CN200350 AccelerometersCN = Approvals country specificPosition Top1.65” (4.24 cm)11/16” (1.8 cm)02 = ¼-28 to M8 x 1.25 BeCu100% relative, condensing, non-submergedRange
200350-09-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)09= No mounting stud100% relative, condensing, non-submergedRange
200350-09-00-01200350 Accelerometers01= CSA, ATEX, IECExPosition Top1.65” (4.24 cm)11/16” (1.8 cm)09= No mounting stud100% relative, condensing, non-submergedRange
200350-09-00-CN200350 AccelerometersCN=Country SpeciifcPosition Top1.65” (4.24 cm)11/16” (1.8 cm)09= No mounting stud100% relative, condensing, non-submergedRange
200350-10-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)10 = 1/4 -28 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-11-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)11= M6x1 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-11-00-CN200350 AccelerometersCN=Country SpeciifcPosition Top1.65” (4.24 cm)11/16” (1.8 cm)11= M6x1 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-12-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)12 = M8x1.25 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-12-00-01200350 Accelerometers01 = CSA, ATEX, IECExPosition Top1.65” (4.24 cm)11/16” (1.8 cm)12 = M8x1.25 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-12-00-CN200350 AccelerometersCN =Country SpecificPosition Top1.65” (4.24 cm)11/16” (1.8 cm)12 = M8x1.25 Adhesive Stud Mount100% relative, condensing, non-submergedRange
200350-13-00-00200350 Accelerometers00 = No ApprovalsPosition Top1.65” (4.24 cm)11/16” (1.8 cm)13 = Magnetic Base Kit100% relative, condensing, non-submergedRange

Values reproduced from manufacturer datasheets. "Not available" means the field is absent from the published source document. Always confirm critical parameters with the original documentation before specification.

More comparisons