Skip to main content
PLCXpert Wiki

Bently Nevada 3300 XL 8 mm Proximity Probes — 330103 Series Compared (Set 11)

5 models · Bently Nevada

AI-generated · verify with manufacturer

Bently Nevada 3300 XL 8 mm Proximity Probes — 330103 Series Compared (Set 11): side-by-side comparison of 5 sibling models from the same product line. Every value is extracted from the manufacturer documentation indexed in this wiki; a field shown as "Not available" is absent from the published source. Use the product links for full specifications, maintenance notes and sourcing guidance.

Specification comparison table

Bently Nevada 3300 XL 8 mm Proximity Probes — 330103 Series Compared (Set 11) — specifications compared across 5 models. Scroll horizontally to see all columns.
ModelProduct / Component TypeAgency Approval OptionMaterialOverall Case Length OptionProbe Case MaterialProbe Tip MaterialTemperatureTotal Length Option
330103-17-22-10-12-053300 XL 8 mm Proximity Probes05 = CSA, ATEX, IECEx ApprovalsPolyphenylene sulfide (PPS).22= 220mmAISI 303 or 304 stainless steel (SST).Polyphenylene sulfide (PPS)Range Probe10 =1.0 meter (3.3 feet)
330103-17-23-05-02-053300 XL 8 mm Proximity Probes, Metric05 = CSA, ATEX, IECEx ApprovalsPolyphenylene sulfide (PPS).23=230mmAISI 303 or 304 stainless steel (SST).Polyphenylene sulfide (PPS)Range Probe05= 0.5 meter (1.6 feet)
330103-19-25-10-01-003300 XL 8 mm Proximity Probes00 = Not requiredPolyphenylene sulfide (PPS).25= 250mmAISI 303 or 304 stainless steel (SST).Polyphenylene sulfide (PPS)Schedule10 =1.0 meter (3.3 feet)
330103-20-25-05-02-003300 XL 8 mm Proximity Probes, Metric00 Not requiredPolyphenylene sulfide (PPS).25=250mmAISI 303 or 304 stainless steel (SST).Polyphenylene sulfide (PPS)Range Probe05 0.5 meter (1.6 feet)
330103-20-25-05-02-CN3300 XL 8 mm Proximity ProbesCN Country SpecificPolyphenylene sulfide (PPS).25=25mmAISI 303 or 304 stainless steel (SST).Polyphenylene sulfide (PPS)Range Probe05 0.5 meter (1.6 feet)

Values reproduced from manufacturer datasheets. "Not available" means the field is absent from the published source document. Always confirm critical parameters with the original documentation before specification.

More comparisons