Skip to main content
PLCXpert Wiki

Bently Nevada 3300 XL 5 mm Proximity Probes — 330171 Series Compared (Set 2)

5 models · Bently Nevada

AI-generated · verify with manufacturer

Bently Nevada 3300 XL 5 mm Proximity Probes — 330171 Series Compared (Set 2): side-by-side comparison of 5 sibling models from the same product line. Every value is extracted from the manufacturer documentation indexed in this wiki; a field shown as "Not available" is absent from the published source. Use the product links for full specifications, maintenance notes and sourcing guidance.

Specification comparison table

Bently Nevada 3300 XL 5 mm Proximity Probes — 330171 Series Compared (Set 2) — specifications compared across 5 models. Scroll horizontally to see all columns.
ModelProduct / Component TypeConnectorMaterialOverall Case Length OptionProbe Case MaterialProbe Tip MaterialTotal Length OptionUnthreaded Length Option
330171-05-63-05-02-CN330171 3300 5mm Probe, 1/4-28 UNF thread, without armormaterialPolyphenylene sulfide (PPS)63=6.3 inAISI 304 stainless steel (SST).Polyphenylene sulfide (PPS).0 5 0.5 meter (1.6 feet)05 = 0.5 in
330171-08-24-10-02-00330171 3300 5mm Probe, 1/4-28 UNF thread, without armormaterialPolyphenylene sulfide (PPS)24 =2.4 inAISI 304 stainless steel (SST).Polyphenylene sulfide (PPS).1 0=1.0 metre (3.3 feet)08 = 0.8 in
330171-10-24-05-02-00330171 3300 5mm Probe, 1/4-28 UNF thread, without armormaterialPolyphenylene sulfide (PPS)24=2.4 inAISI 304 stainless steel (SST).Polyphenylene sulfide (PPS).0 5 0.5 meter (1.6 feet)10 = 1.0 in
330171-12-23-10-01-05330171 3300 5mm Probe, 1/4-28 UNF thread, without armormaterialPolyphenylene sulfide (PPS)23 = 2.3 inAISI 304 stainless steel (SST).Polyphenylene sulfide (PPS).1 0=1.0 metre (3.3 feet)12 = 1.2 in
330171-20-55-05-02-CN330171 3300 5mm Probe, 1/4-28 UNF thread, without armormaterialPolyphenylene sulfide (PPS)55=5.5 inAISI 304 stainless steel (SST).Polyphenylene sulfide (PPS).0 5 0.5 meter (1.6 feet)20 = 2.0 in

Values reproduced from manufacturer datasheets. "Not available" means the field is absent from the published source document. Always confirm critical parameters with the original documentation before specification.

More comparisons