TSXCSY84
Schneider Electric
Overview
The TSXCSY84 is a Multi axis control module in the Modicon Premium Automation platform range from Schneider Electric. It is engineered for industrial automation duties within the Modicon Premium / TSX ecosystem.
Application & Technical Notes
As a multi axis control module, the TSXCSY84 is intended for deployment in panel-based control cabinets and machine enclosures where Modicon Premium / TSX equipment is installed. It performs a defined automation function within the control system and is selected to match the installed Schneider Electric platform.
Key published characteristics include an operating temperature range of 32…140 °F (0…60 °C). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (32…140 °F (0…60 °C)); do not exceed it during commissioning or in enclosed panels without airflow. Avoid condensation — the rated humidity is 10…95 % without condensation; store and operate the module in a dry, pollution-degree-appropriate enclosure. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the TSXCSY84, distinguish three supply tiers: (1) genuine Schneider Electric stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your Modicon Premium / TSX rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Frequently Asked Questions
What is the TSXCSY84?
The TSXCSY84 is a multi axis control module in the Modicon Premium Automation platform range from Schneider Electric. It is described by the manufacturer as: Multi axis control module.
What are the key technical ratings of the TSXCSY84?
Its published highlights include operating temperature 32…140 °F (0…60 °C). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the TSXCSY84 mounted or installed?
Installation follows the standard Modicon Premium / TSX mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the TSXCSY84 compatible with my controller?
It is part of the Modicon Premium / TSX family. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the TSXCSY84?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The TSXCSY84 from Schneider Electric is a multi-axis control module within the Modicon Premium Automation platform. This device features an industrial structure type that complies with EN 61491 and supports advanced control for various applications.
Complementary
| Note | Set of axes 4 followers 4 coordinated Cam profile 7 |
|---|---|
| Topology | Ring |
| Transmission support medium | Fiber optic cable |
| Transmission Rate | 4 Mbit/s Cycle time 2 ms 2 2 ms 4 4 ms 8 maximum number of segment of SERCOS network 9 Maximum optic fiber length 492.1 ft (150 m) glass 124.7 ft (38 m) plastic Maximum length of segment 328.08 ft (100 m) bus X |
| Power dissipation in W | 9 W |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED (red) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 1 LED (yellow) for flashing indicates data transmission and reception (SER) 1 LED (yellow) for flashing module reinitializing (INI) 24 LEDs (green) for channel diagnostic |
| Current consumption | 1800 mA 5 V DC |
| Net Weight | 1.15 lb(US) (0.52 kg) |
Environment
| Standards | EN/IEC 61491 |
|---|---|
| IP Degree of Protection | IP20 |
| Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
| Relative Humidity | 10…95 % without condensation |
Ordering and shipping details
| Category | US1PC2222558 |
|---|---|
| Discount Schedule | PC22 GTIN 3595860287137 |
| Returnability | No |
Packing Units
| Unit Type of Package 1 | PCE |
|---|---|
| Nbr. of units in pkg. | 1 |
| Package 1 Height | 3.7 in (9.5 cm) |
| Package 1 Width | 7.09 in (18.0 cm) |
| Package 1 Length | 10.2 in (26.0 cm) |
| Package weight(Lbs) | 25.6 oz (726.0 g) |
Description
| Note | The Schneider Electric TSXCSY84 is a multi-axis control module designed for industrial applications within the TSX Micro PLCs series. Adhering to the EN 61491 standard ensures high reliability in demanding environments. The system supports eight axes, comprising four real axes, four imaginary axes, and four follower axes, enabling coordinated control over multiple movements. This control module is equipped with a cam profile of 7 that further enhances operational flexibility. Data transmission is facilitated via fiber optic cables, ensuring rapid communication with a transmission rate of 4 Mbit/s. Cycle times are optimized for performance: 2 milliseconds for configurations involving 2 or 4 axes, increasing to 4 milliseconds when managing 8 axes. In terms of electrical specifications, the power dissipation is rated at 9 W, and it has a current consumption of 1800 mA at 5 V DC. The system's topology is designed in a ring configuration, while the communication network operates on the SERCOS 2 protocol. The module's design also includes a simple linear path function, allowing for efficient tracking of auxiliary axes. The TSXCSY84 is a robust solution for complex automation tasks, seamlessly integrating into sophisticated control environments. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.