PST250-600-70

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The PST250-600-70 is an automation component from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As an automation component, the PST250-600-70 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the PST250-600-70, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for PST250-600-70 (opens in a new tab)

Frequently Asked Questions

What is the PST250-600-70?

The PST250-600-70 is an automation component from GE. It belongs to GE's automation product portfolio.

What are the key technical ratings of the PST250-600-70?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the PST250-600-70 mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the PST250-600-70 compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the PST250-600-70?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

General Information

Dimensions

Note	Product Net Width: 360 mm Product Net Height: 420 mm Product Net Depth / Length: 270 mm Product Net Weight: 23 kg Technical Rated Operational Voltage: Main Circuit 208 ... 600 V AC Rated Control Supply Voltage (Us): 100 ... 250 V AC Rated Control Circuit Voltage (Uc): DC Operation 24 V Rated Frequency (f): 50/60 Hz Main Circuit 50 / 60 Hz Rated Operational Power - In-Line Connection (Pe): (400 V) 132 kW (500 V) 160 kW Rated Operational Current - In-Line Connection (Ie): 250 A Rated Operational Power - Inside Delta Connection: at 400 V 220 kW at 500 V 295 kW Rated Operational Current - Inside Delta Connection: 430 A Service Factor Percentage: 115 % Overload Protection: Build-in electronic overload protection Integrated Electronic Overload: Yes Starting Capacity at Maximum Rated Current Ie: 3xIe for 15s Ramp Time: 0 ... 120 s 1 ... 120 s Initial Voltage During Start: 30 ... 70 % Step Down Voltage Special Ramp: 100 ... 30 % Current Limit Function: 1.5 ... 7xIe Switch for Inside Delta Connection: Yes Run Signal Relay: Yes By-pass Signal Relay: Yes Fault Signal Relay: Yes Overload Signal Relay: Yes Analog Outputs: 0…10 volts 0…20 mA 4…20 mA Signal Indication Ready to Start/Standby ON (LED): Green Signal Indication Protection (LED): Yellow Signal Indication Fault (LED): Red Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 30 Communication: FiledBusPlug(Standard) Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00 Terminal Type: Main Circuit: Bars Connecting Capacity Main Circuit: Hole Diameter 10.2 mm Width and Thickness 20x5 mm Connecting Capacity Control Circuit: Rigid 1 x 2.5 mm² Rigid 2 x 1.5 mm² Connecting Capacity Supply Circuit: Rigid 1 x 2.5 Tightening Torque: Control Circuit 0.5 N·m Main Circuit 28 N·m Supply Circuit 0.5 N·m Product Main Type: PST250 Environmental Ambient Air Temperature: Operation 0 ... +50 °C Storage -25 ... +70 °C Material Compliance Conflict Minerals Reporting Template (CMRT): CMRT - Conflict Minerals Reporting Template RoHS Declaration: 1SFC132035D0201 WEEE B2C / B2B: Business To Business WEEE Category: 5. Small Equipment (No External Dimension More Than 50 cm) Certificates and Declarations Declaration of Conformity - CE: 1SFA1-74 Container Information Package Level 1 Width: 400 mm Package Level 1 Depth / Length: 475 mm Package Level 1 Height: 310 mm Package Level 1 Gross Weight: 24.6 kg Package Level 1 EAN: 7320500255612 Package Level 1 Units: 1 piece

Note

Product Net Width: 360 mm Product Net Height: 420 mm Product Net Depth / Length: 270 mm Product Net Weight: 23 kg Technical Rated Operational Voltage: Main Circuit 208 ... 600 V AC Rated Control Supply Voltage (Us): 100 ... 250 V AC Rated Control Circuit Voltage (Uc): DC Operation 24 V Rated Frequency (f): 50/60 Hz Main Circuit 50 / 60 Hz Rated Operational Power - In-Line Connection (Pe): (400 V) 132 kW (500 V) 160 kW Rated Operational Current - In-Line Connection (Ie): 250 A Rated Operational Power - Inside Delta Connection: at 400 V 220 kW at 500 V 295 kW Rated Operational Current - Inside Delta Connection: 430 A Service Factor Percentage: 115 % Overload Protection: Build-in electronic overload protection Integrated Electronic Overload: Yes Starting Capacity at Maximum Rated Current Ie: 3xIe for 15s Ramp Time: 0 ... 120 s 1 ... 120 s Initial Voltage During Start: 30 ... 70 % Step Down Voltage Special Ramp: 100 ... 30 % Current Limit Function: 1.5 ... 7xIe Switch for Inside Delta Connection: Yes Run Signal Relay: Yes By-pass Signal Relay: Yes Fault Signal Relay: Yes Overload Signal Relay: Yes Analog Outputs: 0…10 volts 0…20 mA 4…20 mA Signal Indication Ready to Start/Standby ON (LED): Green Signal Indication Protection (LED): Yellow Signal Indication Fault (LED): Red Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time: 30 Communication: FiledBusPlug(Standard) Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP00 Terminal Type: Main Circuit: Bars Connecting Capacity Main Circuit: Hole Diameter 10.2 mm Width and Thickness 20x5 mm Connecting Capacity Control Circuit: Rigid 1 x 2.5 mm² Rigid 2 x 1.5 mm² Connecting Capacity Supply Circuit: Rigid 1 x 2.5 Tightening Torque: Control Circuit 0.5 N·m Main Circuit 28 N·m Supply Circuit 0.5 N·m Product Main Type: PST250 Environmental Ambient Air Temperature: Operation 0 ... +50 °C Storage -25 ... +70 °C Material Compliance Conflict Minerals Reporting Template (CMRT): CMRT - Conflict Minerals Reporting Template RoHS Declaration: 1SFC132035D0201 WEEE B2C / B2B: Business To Business WEEE Category: 5. Small Equipment (No External Dimension More Than 50 cm) Certificates and Declarations Declaration of Conformity - CE: 1SFA1-74 Container Information Package Level 1 Width: 400 mm Package Level 1 Depth / Length: 475 mm Package Level 1 Height: 310 mm Package Level 1 Gross Weight: 24.6 kg Package Level 1 EAN: 7320500255612 Package Level 1 Units: 1 piece

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.