531X111PSHARG3
GE
Overview
The 531X111PSHARG3 is a Field Exciter from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a field exciter, the 531X111PSHARG3 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the 531X111PSHARG3, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for 531X111PSHARG3 (opens in a new tab)
Frequently Asked Questions
What is the 531X111PSHARG3?
The 531X111PSHARG3 is a field exciter from GE. It is described by the manufacturer as: Field Exciter.
What are the key technical ratings of the 531X111PSHARG3?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the 531X111PSHARG3 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the 531X111PSHARG3 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the 531X111PSHARG3?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
531X111PSHARG3 Technical Specifications Manufacturer General Electric Series 531x Boards Part Number 531X111PSHARG3 About the 531X111PSHARG3 The 531X111PSHARG3 card is a motor field control and power supply board. It was manufactured by General Electric for their 531X replacement board series. Drives and exciters developed by GE can have this card installed. The drive’s required power supply is provided by this card. Motor field circuitry can also be powered with this device. This is a G3 version of the board, meaning that the MOVs for the AC line are mounted externally rather than on the board.
Drive operation is reliant on the 531X111PSHARG3 power supply board functioning properly. This card can produce three power supplies rated at 5 VDC, 15 VDC, and 24 VDC. An integrated pulse transformer on the card provides power to the motor field circuitry in the drive. Device controls are performed via the three onboard relays. The three are comprised of K1 (RUN), K2 (MAX), and K3 (FAULT). An additional three potentiometers are also found on the board. These include P1 FIELD SCALE, P2 CFB ZERO, and P3 CFB ADJUST, with all providing users with the ability to adjust and calibrate current feedbacks and circuits. Feedback and current signals in the card can be adjusted using the the five configurable jumpers found on the card.
General Electric includes a set of installation parameters that users should meet. Risks of damages to the device are lessened by following these guidelines. 531X111PSHARG3 should only be installed by trained personnel that are qualified to handle boards like this. An illustrated wiring guide can be found in the manual and datasheet associated with the board. Originally, General Electric provided technical support for this board.
SPECIFICATIONS Part No.: 531X111PSHARG3 Manufacturer: General Electric Country of Manufacture: United States (USA) Product Type: Field Exciter Series: EX2000
531X111PSHARG3 is a Motor field control and power supply board developed by GE. It is a part of the GE EX2000 excitation system. This card provides the necessary power supply for the drive. This component can also be used to power motor field electronics. The MOVs for the AC line are located externally rather than on the board because this is a G3 version of the board.
531X111PSHARG3 Features The power supply board's efficiency is necessary for drive operation. Three power supplies with a 5 VDC, 15 VDC, and 24 VDC rating can be created with this device. The motor field circuitry in the drive is powered by an integrated pulse transformer on the card. The three onboard relays are used to control the devices. K1 (RUN), K2 (MAX), and K3 make up the trio (FAULT). On the PCB there are also three more potentiometers.
These three enable users to calibrate and alter current feedbacks and circuits: P1 FIELD SCALE, P2 CFB ZERO, and P3 CFB ADJUST. The five programmable jumpers on the card can be used to change the card's feedback and current signals.
Functional Description The power source needed by the drive to function is provided by this power supply board. It also has the necessary tools to power the motor field circuits on the board. This card, which is a G2 revision of the board, was created for usage with external exciters. This card has undergone various changes, yielding in various board arrangements. This card is a G3 revision with all MOVs mounted externally and connected to the AC line.
531X111PSHARG3 Installation Users must adhere to a set of installation requirements provided by General Electric. By adhering to these recommendations, the risk of harm to the equipment is reduced. Only trained professionals who are certified to handle boards like this should install 531X111PSHARG3. The handbook and datasheet that go with the board both have an illustrated wiring diagram. Technical assistance for this board was first supplied by General Electric.
Characteristics Dimensions: 4 cm x 24 cm x 29.2 cm Weight: 0.58 kg
Reproduced from the manufacturer's published data.