IS220PSVOH1B
GE
Overview
The IS220PSVOH1B is an I/O Pack, Servo Control Pack from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an i/o pack, servo control pack, the IS220PSVOH1B is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS220PSVOH1B, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS220PSVOH1B (opens in a new tab)
Frequently Asked Questions
What is the IS220PSVOH1B?
The IS220PSVOH1B is an i/o pack, servo control pack from GE. It is described by the manufacturer as: I/O Pack, Servo Control Pack.
What are the key technical ratings of the IS220PSVOH1B?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS220PSVOH1B mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS220PSVOH1B compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS220PSVOH1B?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
SPECIFICATIONS Part No.: IS220PSVOH1B Manufacturer: General Electric Product Type: I/O Pack, Servo Control Pack Series: Mark VIe
IS220PSVOH1B is a servo interface I/O pack developed by GE under Mark VIe control systems. This I/O Pack is an electrical interface that connects one or two I/O Ethernet networks to a TSVO servo terminal board. To manage two servo valve position loops, the component employs the WSVO servo driver module. The front faceplate of the PSVO contains various LED indications.
Four LEDs display the state of the two Ethernet networks (ENet1/Enet2), as well as a Power and Attn LED and two others called ENA1/2. There is also a single infrared port on the front, which is not used in this pack. After installation, the component is configured with the Control System Toolbox application. The package contains a processing board with input power connectors, local power sources, and an internal temperature sensor. The board also has flash memory and RAM. When the board is replaced, it can be auto-reconfigured. This option can be activated or disabled in the ToolboxST application's Component Editor. If desired, the operator can manually reconfigure the module using the Component Editor. When a terminal board is replaced, the I/O pack must be reconfigured manually. Stroking the actuator in manual mode, position ramping, or step current can be used to test servo performance. Any irregularities in the actuator stroke will be displayed by the trend recorder. More information about this and other board components, installation and operation, and potential compatibility issues can be found in the manufacturer's user guides and manuals.
Reproduced from the manufacturer's published data.