IS200STCIH2AED
GE
Overview
The IS200STCIH2AED is a Terminal Board from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a terminal board, the IS200STCIH2AED is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200STCIH2AED, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200STCIH2AED (opens in a new tab)
Frequently Asked Questions
What is the IS200STCIH2AED?
The IS200STCIH2AED is a terminal board from GE. It is described by the manufacturer as: Terminal Board.
What are the key technical ratings of the IS200STCIH2AED?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200STCIH2AED mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200STCIH2AED compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200STCIH2AED?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
SPECIFICATIONS Part No.: IS200STCIH2AED Manufacturer: General Electric Country of Manufacture: United States(USA) Product Type: Terminal Board Series: Mark VI
IS200STCIH2AED is a Simplex Contact Input terminal board developed by GE under Mark VI series. The Simplex Contact Input terminal board is a small contact input terminal board designed for DIN-rail or flat mounting. The board accepts 24 contact inputs with nominal 24, 48, and 125 V dc excitation from an external source. The contact inputs have noise suppression to protect against surge and high-frequency noise. The PAIC I/O Pack is compatible with the module. The I/O pack plugs into the D-type connector and communicates with the controller via Ethernet. Only simplex systems are supported.
IS200STCIH2AED Installation The STCI, along with a plastic insulator, is mounted on a sheet metal carrier, which is then mounted on a DIN rail. The STCI plus insulator can be mounted on a sheet metal assembly, which is then bolted into a cabinet. The contact inputs are typically wired directly to the terminal block using #18 AWG wires. Shields should be terminated on a separate bracket. STCIH2 has a right-angle header that accepts a variety of commercially available pluggable terminal blocks, totaling 52 terminals. Operation The function and on-board signal conditioning are the same as on TBCI, but they are scaled for 24, 48, and 125 V dc excitation. The input excitation ranges are 16 to 32 V dc, 32 to 64 V dc, and 100 to 145 V dc, respectively. The threshold voltage is 50% of the excitation voltage. The figure shows the contact sensing circuits. Contact input currents are limited to 2.5 mA on the first 21 circuits and 10 mA on circuits 22 through 24. The 24 V dc power supply is current limited to 0.5 A by resetting polymer positive temperature coefficient fuses. Filters reduce high-frequency noise and suppress surge on each input near the point of signal entry. The discrete input voltage signals are routed to the I/O processor, which converts them to digital signals and sends them to the controller. IS200STCIH2A Characteristics E1 and E2 are the labels on the terminal ring on either side of the terminal board. A single 37-pin (female) D-type connector and a single three-position female plug are opposite the terminal strip on the board. On the board's short edges, two round apertures are cut into the board, one opposite the other. There are also over 80 resistors, capacitors, diodes, and a single integrated circuit on the board. Product Attributes The number of available channels - 24 dry contact voltage input channels. Nominal excitation voltage of 24 V dc, floating, ranging from 18.5 to 32 V dc (Pluggable TB) Current input - For applications requiring 24 V dc: The first 21 circuits draw 2.5 mA, while the last three draw 10 mA. Hardware filter for input, 4 ms I/O board fault detection - Excitation voltage loss at the contact input, Contact input that does not respond in test mode
About the IS200STCIH2AED This IS200STCIH2AED I/O Module Terminal Board product offering is functionally definable as an IS230 style of Mark VIe or Mark VIeS Series modular assembly as the IS200STCIH2A I/O Module Terminal Board functional product number is kicked off through an inclusion of the IS200 series tag. Some of the other important qualities shared through this common medium would have to include the IS200STCIH2A I/O Module Terminal Board's:
STCI Functional Product Personal Abbreviation Conformal Choice of PCB Coating A-rated Sole Revision Group 2 Mark VIe/S Series Grouping IS200STCIH2A Hardware Context The IS200STCIH2A I/O Module Terminal Board functional product number is by no means the sole source for IS200STCIH2A I/O Module Terminal Board device for hardware tips and specifications. Its sparse original manual materials on the internet are still able to describe its:
24 V DC Voltage Rating PDIA Impacted I/O Pack IS230SNCI Compatibility IS230STCI Compatibility
Reproduced from the manufacturer's published data.