IS200STAIH2ABA
GE
Overview
The IS200STAIH2ABA is an automation component from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an automation component, the IS200STAIH2ABA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200STAIH2ABA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200STAIH2ABA (opens in a new tab)
Frequently Asked Questions
What is the IS200STAIH2ABA?
The IS200STAIH2ABA is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IS200STAIH2ABA?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200STAIH2ABA mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200STAIH2ABA compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200STAIH2ABA?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
IS200STAIH2ABA Technical Specifications Part Number IS200STAIH2ABA Manufacturer GE Energy Series Mark VIe Functional Acronym STAI Functional Description Simplex Terminal Analog Input PCB Coating Conformal Coating Functional Revision 1 A Functional Revision 2 B Artwork Revision A Shipping Weight 4.19 lb
About the IS200STAIH2ABA Model Name: IS200STAIH2ABA. Original Manufacturer: General Electric (GE), under GE Energy. Series: Part of the Mark VIe Wind Turbine Control System Series. Functional Description: Simplex Terminal Analog Input (STAI). Revisions: Modified from its parent product (IS200STAIH2) through three significant product revisions, rated A, B, and A respectively. Hardware Tips and Specifications Primary Application: Provides terminal board circuitry for 10 analog inputs and two analog outputs. Interface: Interfaces with the special-assembly Mark VIe PAIC pack. Terminal Blocks: Utilizes a series of plug-in terminals (not safety certified). Described as high-density Euro-block style terminal blocks. Compatibility: Compatible with the primary Mark VIe control system. PCB Protection: All hardware components are protected beneath a thin layer of chemically-applied conformal-style printed circuit board protective coating. Information Basis: Hardware-specifying product information is based on instructional manual materials surrounding its original, unrevised IS200STAIH2 parent PCB.
### Specifications
* **Part Number:** IS200STAIH2ABA * **Manufacturer:** General Electric * **Series:** Mark VIe * **Product Type:** Simplex Analog Input Terminal Board * **Number of Channels:** 12 * **Maximum Lead Resistance:** 15 $\Omega$ * **Outputs:** 24 V DC * **Size:** 15.9 cm high x 10.2 cm wide * **Operating Temperature:** -30 to +65 °C * **Technology:** Surface mount * **Repair:** 3-7 Days * **Country of Origin:** USA * **Availability:** In Stock * **Manual:** GEH-6721L
### Functional Description
The IS200STAIH2ABA is a compact Simplex Analog Input (STAI) terminal board designed for Mark VIe distributed control systems. It features 10 analog inputs and 2 analog outputs, connecting to the PAIC pack. The board utilizes high-density Euro-block terminal blocks and includes an on-board ID chip for system diagnostics. The PAIC I/O pack plugs into the D-type connector and communicates via Ethernet, supporting only simplex systems.
### Installation
* The STAI board can be mounted on a DIN-rail using a sheet metal carrier with a plastic insulator or fastened directly to a cabinet via a sheet metal assembly. * Typically, #18 AWG shielded twisted pair wires are used, and an I/O cable shield terminal is available near the terminal blocks. * Supported input and output types include: * Two-wire, three-wire, four-wire, or externally powered transmitters with analog input. * 5 V and 10 V DC analog input. * 0-20 mA current analog output. * 0-200 mA current analog output.
### Operation
* The terminal board provides a 24 V DC power supply for transmitters and transducers. * Users can select between current or voltage inputs via jumper settings. * Two analog output circuits are available: one is fixed at 4-20 mA, while the other can be configured via jumpers for 4-20 mA or 0-200 mA. * Due to its single cable connection, this board is unsuitable for TMR (Triple Modular Redundancy) applications.
### Diagnostics
* Output current is measured by voltage drop across a series resistor on the board, and the I/O processor generates an alarm if outputs become unhealthy. * The I/O controller queries each ID device available on the cable connectors. * The ID device is a read-only chip that encodes the board’s serial number, type, revision number, and connector placement; a mismatch with the I/O controller results in a hardware incompatibility fault.
### Configuration
Jumpers are used to configure the terminal board as follows:
* **J1A through J8A:** Used to choose between current or voltage input. * **J1B through J8B:** Determine if the return is linked to common or left open. * **J9A and J10A:** Used to choose input current between 1 mA and 20 mA. * **J9B and J10B:** Determine if the return is linked to common or left open. * **J0:** Used to adjust Output 1 to 20 mA or 200 mA.
Reproduced from the manufacturer's published data.