IS200RAPAG1BCA
GE
Overview
The IS200RAPAG1BCA is a Rack Power Supply Board from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a rack power supply board, the IS200RAPAG1BCA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It conditions and distributes the low-voltage supply that powers the controller, I/O and communication modules on the same rack.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Ensure adequate ventilation and do not overload the supply beyond its published current budget; consider redundancy for critical racks. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200RAPAG1BCA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the output voltage and current to the GE product portfolio load and allow headroom for future expansion. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200RAPAG1BCA (opens in a new tab)
Frequently Asked Questions
What is the IS200RAPAG1BCA?
The IS200RAPAG1BCA is a rack power supply board from GE. It is described by the manufacturer as: Rack Power Supply Board.
What are the key technical ratings of the IS200RAPAG1BCA?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200RAPAG1BCA mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200RAPAG1BCA compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200RAPAG1BCA?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
IS200RAPAG1BCA Technical Specifications Part/Model Number IS200RAPAG1BCA Revision BCA Product Type Rack Power Supply Board Type Modular with Faceplate Original Manufacturer General Electric Assembly Type Normal Assembly About the IS200RAPAG1BCA The IS200RAPAG1BCA mounts into an Innovation Series Rack system. The board provides dc control voltages for other boards within the rack via its P1 connector. The IS200RAPAG1BCA has a wide front faceplate attached to its surface using screw connectors. The faceplate is two slots wide and includes several mounted components, including: two LEDs a reset button an opening that allows operators to access four test points two mounting clips The board surface of the IS200RAPAG1BCA is populated by heat sinks, capacitors, resistors, an inductor coil, and a 1 amp 250 V fuse. The board has a serial 1024-bit memory device that maintains revision information and board ID. This can be accessed via the P1 connector through the BRDID data line. Additional information about board function, installation, or specifications may be found through GE user guides and manuals. These publications have detailed information regarding proper handling and procedures, as well as necessary precautions. IS200RAPAG1BCA Voltage Specifications Unlike the majority of General Electric Mark VI Turbine Control System Series products made available to our extended new and reconditioned inventory here, this IS200RAPAG1BCA device is actually well-contextualized online within a series of relevant originally-printed instructional manual materials. With this being true, the actual significance of this IS200RAPAG1BCA product's Group One Mark VI Series product grouping can be explored. Some of this IS200RAPAG1BCA device's Group One Mark VI Series grouping-dependent specifications include its: 48 V dc squarewave, ±10% range 25 kHz, ±10% frequency
Specifications
| Output | Load-dependent load |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.