IS200DSPXH1BBD
GE
Overview
The IS200DSPXH1BBD is a PCB from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a pcb, the IS200DSPXH1BBD is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200DSPXH1BBD, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200DSPXH1BBD (opens in a new tab)
Frequently Asked Questions
What is the IS200DSPXH1BBD?
The IS200DSPXH1BBD is a pcb from GE. It is described by the manufacturer as: PCB.
What are the key technical ratings of the IS200DSPXH1BBD?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200DSPXH1BBD mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200DSPXH1BBD compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200DSPXH1BBD?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
SPECIFICATIONS Part No.: IS200DSPXH1BBD Manufacturer: General Electric Function: DSP Control Board Country of Manufacture: United States (USA) LED: DS1, DS2 I/O connectors: P1, P5, P6 Assembly: Base Level Revision: B, ISBus Revision One I/O Connectors: P1, P5, and P6 Memory: Flash, NVRAM, RAM, and Add-Only Repair: 3-5 Days Test point ports: P6 and P7 Product Type: PCB Availability: In Stock Series: EX2100 Functional Description IS200DSPXH1BBD functions as DSP (Digital Signal Processor) Control board developed by GE. It is the primary controller for the Innovation Series drives bridge, motor regulator, and gating functions. It also controls the EX2100 Excitation Control's generator field control functions. The logic, processing, and interface functions are all provided by the board. The board is comprised of a high-performance digital signal processor (DSP), standard memory components, and an application-specific integrated circuit (ASIC) that performs custom logic functions. The two LEDs on this board display Fault and Status information. When there are problems with the board, the red DS1 LED will illuminate. The green DS2 LED will flash when the board is operating normally, will be solid when the DSP has stopped, and will be off when a fault occurs during reset. Features At the assembly level, the functional revision is B with ISBus Revision One, featuring group variation H and conformal coating. The I/O connectors consist of three: P1, P5, and P6. Manufactured by GE Motors and Industrial Systems, the board incorporates various memory types including Flash, NVRAM, RAM, and Add-Only, along with standard hardware components such as Stack Overflow (INT0), Inner Loop Load Pulse (INT1), and two configurable inputs (INT2 and INT3) at the base level. It offers a range of I/O Definitions, including a P6 engineering monitor port designed to establish a connection with the DSP synchronous serial port. Additionally, there is a P1 backplane connector that facilitates memory mapping, and a P5 DSP emulator port that not only serves as a scan interface for emulation but also supports FLASH programming. Once installed, the board is positioned within the board rack and establishes its connection with the backplane through a 128-pin, 4-row DIN connector. Within the EX2100 series, this board is categorized under the DSPX model, and it can be affixed to another board of the series, specifically the EISB model. However, it's important to note that these two boards can also be detached, offering a level of flexibility in system configuration.
Specifications
| Standard | Hardware Features |
|---|---|
| Data | Memory: The DSP includes dedicated data memory resources, such as registers and data buffers, to store and manipulate the input and output data during signal processing operations. |
| Standard | Hardware Stack Overflow (INT0), Inner Loop Load Pulse (INT1), Two Configurable Inputs (INT2 and INT3) |
| Digital | Signal Controller Board model IS200DSPXH1B is one of the DSPX models that can be used in conjunction with the EX2100 Excitation Controller series. The DSPX model is not equipped with any fuses, does not have any adjustable hardware, and does not contain any user test points. If your IS200DSPXH1B model is being used in conjunction with the EX2100 Series the DSPX board will be attached to another board which is known as the EISB; if needed these two boards can be detached. |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.