IS200DAMDG2AAA
GE
Overview
The IS200DAMDG2AAA is a PCB from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a pcb, the IS200DAMDG2AAA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200DAMDG2AAA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200DAMDG2AAA (opens in a new tab)
Frequently Asked Questions
What is the IS200DAMDG2AAA?
The IS200DAMDG2AAA is a pcb from GE. It is described by the manufacturer as: PCB.
What are the key technical ratings of the IS200DAMDG2AAA?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200DAMDG2AAA mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200DAMDG2AAA compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200DAMDG2AAA?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
IS200DAMDG2AAA Technical Specifications Original Manufacturer GE Industrial Systems Series Innovation Series Functional Part Number IS200DAMDG2AAA Product Type Gate Drive Amplifier/Interface Board Instruction Manual GEI-100262A Revision Total 3 Revisions Backwards-Compatibility 1st two revisions Frequently Asked Questions about IS200DAMDG2AAA How many total IS200DAMDG2AAA Gate Drive Amplifier Interface Board devices are used in a typical innovation series drive? There are a total of Qty 3 IS200DAMDG2AAA used in a drive (1 per phase leg). How does the IS200DAMDG2 PCB product version differ from the DAMA, DAMB, DAMC, and DAME versions of the Gate Drive Amplifier Interface Board? The IS200DAMDG2A version has a frame of 125 or 92 while the other versions have different values. Additionally, the powerrex IGBT used is the CM200DY-28H as opposed to the other board versions. About the IS200DAMDG2AAA This IS200DAMDG2AAA Gate Drive Amplifier Interface Board printed circuit board product offering from General Electric was originally designed and manufactured specifically with a functional placement in the greater Mark VI Turbine Control System Series in mind. The Mark VI Series that this IS200DAMDG2AAA Gate Drive Amplifier Interface Board product belongs to, as you may have been able to deduce based off of its full extended GE Mark product series title, exists with a specific set of possible functional applications in the management and control systems of General Electric-compatible gas, steam, and wind turbine automated drive assemblies. This must be treated as quite the notable functional upgrade from the previously-released Mark V Turbine Control System Series of a similar full extended series name, as the Mark VI Series of a similar full extended product series title was developed specifically with the additional wind turbine possible functional environment. Hardware Tips and Specifications The IS200DAMDG2AAA is a device which is known as a gate drive amplifier and interface board. These boards are used to interface between the control rack and power switching devices or IGBTs in Innovation Series low voltage drives. The IS200DAMDG2AAA is a device in the Mark VI series by General Electric. Mark VI is one of several series which make up the Mark family of devices by GE. The IS200DAMDG2AAA features a power rating of either 92 frames or 125 frames. This specific IS200DAMDG2AAA style of Mark VI Series printed circuit board product offering is actually not the originally-developed product of its specific General Electric Mark VI Series functionality, as that would have to be deemed the IS200DAMDG2 parent PCB product notably not utilizing this IS200DAMDG2AAA PCB's three-fold extensive product revision history. Some of the other relevant IS200DAMDG2AAA Board qualities only made apparent through a diligent guided analysis of its IS200DAMDG2AAA functional product number include its: DAMD functional product abbreviation Group 2 Mark VI Series product grouping Normal PCB coating style Normal Mark VI Series assembly Domestic original manufactured location These devices have light-emitting diodes or LEDs. These LEDs let the user know whether the IGBT is turned off or on. The DAMDG2 is one of six (6) variations of gate drive boards named DAMC, DAMA, DAMB, DAMDG1, DAMDG2, and DAME. The boards in the DAM series are used when attaching bridge personality interfaces boards, emitters, IGBT gates, and collector terminals. These DAM boards don’t contain test points, fuses, or configurable parts. DAMD boards interface between devices without amplifying. These boards do not have any power input. The IS200DAMDG2AAA features four light-emitting diodes or IGBT driver monitors named 2FF, 2ON, 1FF, and 1ON. 2FF and 1FF are green and 2ON and 1ON are yellow. The IS200DAMDG2AAA also contains twelve (12) pins or IGBT connections which are called C1, G1IN, COM1, C2, NC, COM2, and G2IN. The IS200DAMDG2AAA and other DAMD cards like it are shaped like the letter C. A large resistor with a small knob is situated on the left side of the IS200DAMDG2AAA. This resistor is long and rectangular and positioned parallel to the left edge. SPECIFICATIONS: Part Number: IS200DAMDG2A Manufacturer: General Electric Function: Gate Drive Interface Board Frame Rate: 125
Specifications
| Power | Rating: The board is designed with a power rating of either 125 frames or 92 frames. This power rating indicates the board's capacity to handle and regulate power within the low-voltage drive system. It ensures that the board can effectively handle the power demands of the connected IGBTs and facilitate efficient power switching operations. |
|---|---|
| Connector | Pins for IGBT Connections: Features twelve connector pins that are specifically designed for IGBT connections. These pins include G2IN, COM2, NC, C2, COM1, G1IN, and C1. These pins ensure secure and reliable connections between the board and the IGBTs, facilitating proper signal transmission and control over the power switching devices. |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.