IS200BICLH1BAA
GE
Overview
The IS200BICLH1BAA is a Bridge Interface Board from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a bridge interface board, the IS200BICLH1BAA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200BICLH1BAA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200BICLH1BAA (opens in a new tab)
Frequently Asked Questions
What is the IS200BICLH1BAA?
The IS200BICLH1BAA is a bridge interface board from GE. It is described by the manufacturer as: Bridge Interface Board.
What are the key technical ratings of the IS200BICLH1BAA?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200BICLH1BAA mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200BICLH1BAA compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200BICLH1BAA?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
IS200BICLH1BAA Technical Specifications Manufacturer General Electric Series Mark VI Speedtronic Part Number IS200BICLH1BAA Product Type Bridge Interface Board Functional Abbreviation BICL Revision Total 3 Revisions Backwards-Compatibility 1st two revisions About the IS200BICLH1BAA The IS200BICLH1BAA is a GE printed circuit board manufactured as a component for the Mark VI series. The Mark VI is the fifth iteration of GE’s Speedtronic series for gas and steam turbine management. The Mark VI Turbine Control System Series containing this IS200BICLH1BAA product, as it is known at length, actually exists with a series of specific intended functional applications in the control and management systems of General Electric-aligned gas, steam, and even wind turbine automated drive assemblies, as its full extended series title should have indicated. This IS200BICLH1BAA product's Mark VI Series is generally defined as a lasting and important improvement upon the previously-released Mark V Turbine Control System Series of a similar full extended series title, as the Mark VI Series added the alternative energy-based wind turbine possible functional application onto the gas and steam-based applications featured in the Mark V Series of the same full extended title.
Hardware Tips and Specifications
The MKVI is designed with close coordination between hardware and software, starting with a control module with a 13- or 21-slot VME card rack. Mark VI series is available in Simplex and Triple redundant forms for small applications and for large integrated systems with modules ranging from one to many. The IS200BICLH1BAA functions as an IGBT Drive/Source Bridge Interface board. The board interfaces between the main control board and boards like the BPIA/BPIB or the SCNV board. The IS200BICLH1BAA also provides bridge and ambient temperature monitoring, as well as a panel and system fault string interface. Control logic on the IS200BICLH1BAA is configured in the CPU of the main control board using an electronically programmable logic device, or EPLD. The IS200BICLH1BAA is built with two backplane connectors. These are marked P1 and P2. These plug into a VME type rack. No other connectors are located on the board. The board has very few components but does have a serial 1024-bit memory device, as well as four relays. Each relay has a relay diagram printed on its top surface. The board has no test points, fuses, or adjustable hardware.
Our warehouse team will protect the IS200BICLH1BAA with anti-static material during shipment to your facility. The board should be treated as static-sensitive at all times. Installation procedures can be found in GE publication GEI-100264. These originally-printed instructional manual materials go into detail about a specific series of especially-crucial BICL Control Board hardware components, with the first truly existing as the Fan Speed PWM Output. This IS200BICLH1BAA printed circuit board product offering's Fan Speed PWM Output, again as described above, exists as an open and isolated style of collector transistor component, that has singular resistors stored in series with the collector. In the greater Mark VI Turbine Control System Series' automated drive assembly, when this IS200BICLH1BAA device's PWM line from the EPLD component board is considered to be taken high. When the transistor is off, this IS200BICLH1BAA device's fan component will essentially be off as a result, understandably enough. This IS200BICLH1BAA product's general fan speed does also in fact increase as a function of longer or shorter detected PWM output.
Reproduced from the manufacturer's published data.