IS200BICLH1AFD
GE
Overview
The IS200BICLH1AFD is an automation component from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an automation component, the IS200BICLH1AFD is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200BICLH1AFD, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200BICLH1AFD (opens in a new tab)
Frequently Asked Questions
What is the IS200BICLH1AFD?
The IS200BICLH1AFD is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IS200BICLH1AFD?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IS200BICLH1AFD mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200BICLH1AFD compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200BICLH1AFD?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
IS200BICLH1AFD Technical Specifications Original Manufacturer GE Industrial Control Systems Product Series Innovation Series Functional Part Number IS200BICLH1AFD Functional Abbreviation BICL Functional Description IGBT Drive/Source Bridge Interface Board PCB Coating Style Conformal Coating Functional Revision 1 A Functional Revision 2 F Artwork Revision D Instruction Manual GEI-100264 About the IS200BICLH1AFD The IS200BICLH1AFD is a circuit board component made by General Electric as part of their Speedtronic Mark VI system Series specifically. The MKVI was designed by GE for the management of industrial steam or gas turbines and included Ethernet and DCS communications from a windows-based operating system. Like most Speedtronic systems of later iterations (Mark IV forward), the Mark VI is designed with triple-redundant modular protection capability for important controls like temperature, speed, overspeed, and vibration. The IS200BICLH1AFD functions as an IGBT Drive/Source Bridge Interface Board, providing an interface between the Innovation Series Drive main control PCB and several Bridge Personality Interface PCB components.
Hardware Tips and Specifications
While the primary intended functionality of the IS200BICLH1AFD is to act as an interface between Innovation Series main PCBs and personality interface PCBs; this Mark VI product does feature some bonus functions that may serve your automated industrial needs well. The IS200 BICL is capable of acting as an interface for panel and system fault strings, ambient and bridge temperature monitoring, and pulse width modulated speed control. All of these aforementioned functions are implemented through the use of an electronically programmable logic device or EPLD. This EPLD can be programmed from the main control boards central processing unit or CPU, and only during initial power-up or hard reset of the greater assembly. As a GE Industrial Systems product, this BICL component board plugs into a VME type rack using its P1 and P2 connectors, which are the only two connectors present on this particular board's base plate. The IS200BICLH1AFD has a 1024 bit serial memory device for board ID and revision information. The board is designed with four relays, four RTDs (for thermal detection,) as well as various integrated circuits, transistors, capacitors, and resistors. The board’s front baseplate connects to the greater drive assembly via two screw mounts and is considered blank; not featuring any labeling or LED indicators for fault determination. Beyond all of the technologically specialized interior components necessary to include with the IS200BICLH1AFD assembly, this drive component part offers a protective circuit board coating for basic PCB survivability. As designated by the "H1" group designation in this printed circuit board's part number, this PCB is protected by a layer of special conformal coating. While conformal circuit board coating is significantly thinner than its competitor in normal PCB coating, it is a much more uniform layer of coating that should cover every surface of the board in its entirety; unlike normal PCG coating.
Installation Tips and Specifications
Please note the IS200BICLH1AFD is designed to install in slot five of the drive assembly only and may be damaged if installed incorrectly. Do not insert or adjust board connections while the board is powered up, as this could damage the internal drive assembly greatly, or even worse, cause injury to the drive administrator. This part's manufacturer, GE Industrial Control Systems, heavily recommends the wearing of a ground strap during the entirety of the IS200BICLH1AFD component board's installation. As with any component board installation, it is crucial to test that the greater drive assembly lacks a lasting voltage, static or otherwise, before attempting to mount the BICL PCB in its VME slot. Before attempting to remove a defective BICL from its VME rack, the drive installer must remember to unseat the board from the assembly through the considerate raising of an ejector tab. The BICL Board Layout Diagram embedded below should be of some help, as it was sourced from the correct corresponding instructional manual GEI-100264. Our team at AX Control protects all static sensitive products with anti-static bags to protect from damage during shipment.
Reproduced from the manufacturer's published data.