IS200ATBAG1BAA1
GE
Overview
The IS200ATBAG1BAA1 is an Application Input/Output Terminal Board from GE. It provides 1 channels and is built for signal interfacing within the GE product portfolio systems.
Application & Technical Notes
As an application input/output terminal board, the IS200ATBAG1BAA1 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It converts field signals (sensors, switches, transmitters) into the digital or analogue values the controller processes, forming the acquisition layer of the automation scheme.
Key published characteristics include 1 channels, an operating temperature range of 0 to +60°C. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0 to +60°C); do not exceed it during commissioning or in enclosed panels without airflow. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IS200ATBAG1BAA1, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IS200ATBAG1BAA1 (opens in a new tab)
Frequently Asked Questions
What is the IS200ATBAG1BAA1?
The IS200ATBAG1BAA1 is an application input/output terminal board from GE. It is described by the manufacturer as: Application Input/Output Terminal Board.
What are the key technical ratings of the IS200ATBAG1BAA1?
Its published highlights include 1 channels, operating temperature 0 to +60°C. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IS200ATBAG1BAA1 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IS200ATBAG1BAA1 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IS200ATBAG1BAA1?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
IS200ATBAG1BAA1 Technical Specifications OEM General Electric Series Mark VI Speedtronic Functional Part Number IS200ATBAG1BAA1 Product Type Interface Card Functional Acronym ATBA Revision Quantity 3 Revisions Assembly Type Normal Assembly About the IS200ATBAG1BAA1 The IS200ATBAG1BAA1 is a component manufactured for General Electric’s Mark VI series. The MKVI is one of the most advanced of GE’s gas/steam turbine Speedtronic management systems that includes a Windows 2000/XP based operator interface, Ethernet and DCS communications, and Cimplicity software. This server-based HMI/SCADA software collects and shares real-time and historical data that provides visibility to control and monitor plant equipment, processes, and resources. The Mark VI Turbine Control System Series, as it is known in length, is rather self-described as it exists with a restricted set of possible functional applications in the management and control systems of General Electric-compatible gas, wind, and steam turbines; quite the massive improvement upon the more-restricted gas and steam turbine setting made available to the previously-released Mark V Turbine Control System Series of the same name. This IS200ATBAG1BAA1 device's Mark VI Series is additionally lauded as an impressive GE Mark product series for its status as one of the final-released GE Mark product series exhibiting the patented Speedtronic control system technology across a range of its different offerings. Hardware Tips and Specifications The largest component on the IS200ATBAG1BAA1 is a sixty-pin terminal block located in the center of the board. This block is used to connect to backplane connectors J6 and J7 located on the CABP board (Control Assembly Backplane.) The two lines of thirty connectors are labeled in blacks ranging from one connector up to thirteen connectors. These include: system fault string (3,) local fault string (3,) digital inputs (12,) analog inputs (5,) Tachometer (10,) MA Pilot (3,) Fdbk (2,) SSR (2,) digital outputs (13,) pot (2,) and analog outputs (5.)The IS200ATBAG1BAA1 is built with two male vertical pin connectors. These are marked J6 and J7. One is a 36-pin connector (J6,) and the other is a 25-pin connector (J7.) The opposite side of the board includes a cable shield to both protect and contain cables. The IS200ATBAG1BAA1 should be handled at all times as a static-sensitive board. Technicians should use a grounding strap when installing or maintaining this component. Our warehouse will use anti-static coverings to protect the board from static discharge during shipment. GE publication GEI-100284 will provide more information on the installation and maintenance of the IS200ATBAG1BAA1. Please refer to documentation as needed for guidance. Given the fact that this IS200ATBAG1BAA1 printed circuit board product offering is not surrounded by any great amount of originally-printed instructional manual materials online, all of the above-included IS200ATBAG1BAA1 PCB information has been directly sourced from a diligent technician-led visual inspection of the IS200ATBAG1BAA1 device itself. Given this IS200ATBAG1BAA1 printed circuit board or PCB for short's lack of pertinent instructional documentation, the IS200ATBAG1BAA1 functional product number can be utilized as a decently-strong source of IS200ATBAG1BAA1 Board hardware component and component specification information; coding for these relevant details in a series of consecutive functional naming elements. For example, this IS200ATBAG1BAA1 product number begins with an inclusion of the dual-functional IS200 series tag indirectly delegating both this IS200ATBAG1BAA1 product's normal Mark VI Series assembly as well as its domestic original manufacture location. Some of the other pertinent traits revealed through this medium include the IS200ATBAG1BAA1 Board's: ATBA functional product acronym Group one Mark VI Series product grouping Normal PCB coating style Three-fold revision history Specifications Part Number: IS200ATBAG1BAA1 Manufacturer: General Electric Series: Drive Control Product Type: Application Input/Output Terminal Board
Specifications
| Number of | Channels: 1 |
|---|---|
| Input | Span: 1 - 5 V DC |
| Connector | Ratings: |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.