IC755CSW07CDA

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC755CSW07CDA is an Operator Terminals in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As an operator terminals, the IC755CSW07CDA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC755CSW07CDA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC755CSW07CDA (opens in a new tab)

Frequently Asked Questions

What is the IC755CSW07CDA?

The IC755CSW07CDA is an operator terminals in the Quickpanel range from GE. It is described by the manufacturer as: Operator Terminals.

What are the key technical ratings of the IC755CSW07CDA?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC755CSW07CDA mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC755CSW07CDA compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC755CSW07CDA?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC755CSW07CDA is a QuickPanel+ Operator terminal. It is part of the Visualization product catalog that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). It functions as a Human Machine Interface (HMI), featuring an embedded display measuring 7-inch widescreen TFT LCD screen with resolution of 800 x 480 pixels. It comes with a projected capacitive, multi-touch interface and an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor. The integrated memory available to this HMI includes 512 MB DDR2 SDRAM; 256 MB SLC NAND Flash and 512 KB SRAM. For communication, this device has One (1) Ethernet, and One (1) RS232 communication ports. This terminal operates at an input supply voltage of 24 VDC.

Description

Note	The IC755CSW07CDA is a QuickPanel+ operator terminal from Emerson automation. This device is popularly termed as Human Machine Interface (HMI) or Operator Interface Terminal (OIT) by most personnel in the industry as this electronic device is primarily used to provide real-time monitoring and control capability of the connected machine or process through the embedded 7-inch widescreen display with resolution of 800 x 480 pixels and the multi-touch operator input interface. In addition, this terminal is also capable of functioning as a controller, machine gateway and data historian. The IC755CSW07CDA is an HMI device that supports panel mounting or VESA 75 installation. It requires an input supply voltage of +24VDC ±20% terminated to the provided 3-pin Phoenix type connector. This device also has a maximum power consumption of 15 Watts. It uses natural convection for device cooling and must be installed at an application area with temperature range of 0-55 Degrees Celsius and 85% relative humidity. The IC755CSW07CDA is pre-installed with an instance of Windows Compact Embedded 7 Operating System (OS). This operating system provides a user-friendly configuration environment and provides connectivity capabilities and terminal management features and tools. This HMI is installed with an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor with integrated memories that is comprised of 512 MB DDR2 SDRAM, 256 MB SLC NAND Flash and 512 KB SRAM. This HMI is provided with One (1) Ethernet I/P communication port and One (1) RS232 communication interfaces. It also has Three (3) USB ports and One (1) SD SDHC removable card slot for memory expansion. The IC755CSW07CDA terminal is a 7-inch Quickpanel terminal manufactured by GE Fanuc. It is Quickpanel series terminal with a color TFT widescreen that can display clear data and information. The panel supports multi-touch control and is easy to use. It has a resolution of WVGA 800 x 480 pixels. It is powered with a 24 Volts DC supply. The terminal uses the GE monogram bezel. The terminal is designed with a NEMA 4X enclosure. It is equipped with a 512 MB DDR2 SDRAM and a 256 MB NAND flash memory for storage. The IC755CSW07CDA terminal features a single 10/100 Base T Ethernet port and a single RS-232 port for communication. Two USB ports are also present in the display terminal. The temperature should be maintained between 0 and 55 degrees Celsius for optimal operation. The operator interface terminal has been certified with the UL, CE, and EN standards. The GE Fanuc IC755CSW07CDA terminal is powered with an ARM A8 cortex processor with a speed of 1 GHz. It is able to process 2D and 3D graphics easily. The terminal is equipped with a NEON SIMD media accelerator that helps to process graphics-intensive processes. Another Vector floating point coprocessor is also present to process the logical operations. The terminal uses the Windows 7 operating system for interfacing with the operators. The IC755CSW07CDA terminal has a maximum power consumption rating of 15 Watts. The natural convection method is used to maintain the temperature of the terminal. It can be stored in a temperature set between -10 and 60 degrees Celsius when not in use.

Note

The IC755CSW07CDA is a QuickPanel+ operator terminal from Emerson automation. This device is popularly termed as Human Machine Interface (HMI) or Operator Interface Terminal (OIT) by most personnel in the industry as this electronic device is primarily used to provide real-time monitoring and control capability of the connected machine or process through the embedded 7-inch widescreen display with resolution of 800 x 480 pixels and the multi-touch operator input interface. In addition, this terminal is also capable of functioning as a controller, machine gateway and data historian. The IC755CSW07CDA is an HMI device that supports panel mounting or VESA 75 installation. It requires an input supply voltage of +24VDC ±20% terminated to the provided 3-pin Phoenix type connector. This device also has a maximum power consumption of 15 Watts. It uses natural convection for device cooling and must be installed at an application area with temperature range of 0-55 Degrees Celsius and 85% relative humidity. The IC755CSW07CDA is pre-installed with an instance of Windows Compact Embedded 7 Operating System (OS). This operating system provides a user-friendly configuration environment and provides connectivity capabilities and terminal management features and tools. This HMI is installed with an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor with integrated memories that is comprised of 512 MB DDR2 SDRAM, 256 MB SLC NAND Flash and 512 KB SRAM. This HMI is provided with One (1) Ethernet I/P communication port and One (1) RS232 communication interfaces. It also has Three (3) USB ports and One (1) SD SDHC removable card slot for memory expansion. The IC755CSW07CDA terminal is a 7-inch Quickpanel terminal manufactured by GE Fanuc. It is Quickpanel series terminal with a color TFT widescreen that can display clear data and information. The panel supports multi-touch control and is easy to use. It has a resolution of WVGA 800 x 480 pixels. It is powered with a 24 Volts DC supply. The terminal uses the GE monogram bezel. The terminal is designed with a NEMA 4X enclosure. It is equipped with a 512 MB DDR2 SDRAM and a 256 MB NAND flash memory for storage. The IC755CSW07CDA terminal features a single 10/100 Base T Ethernet port and a single RS-232 port for communication. Two USB ports are also present in the display terminal. The temperature should be maintained between 0 and 55 degrees Celsius for optimal operation. The operator interface terminal has been certified with the UL, CE, and EN standards. The GE Fanuc IC755CSW07CDA terminal is powered with an ARM A8 cortex processor with a speed of 1 GHz. It is able to process 2D and 3D graphics easily. The terminal is equipped with a NEON SIMD media accelerator that helps to process graphics-intensive processes. Another Vector floating point coprocessor is also present to process the logical operations. The terminal uses the Windows 7 operating system for interfacing with the operators. The IC755CSW07CDA terminal has a maximum power consumption rating of 15 Watts. The natural convection method is used to maintain the temperature of the terminal. It can be stored in a temperature set between -10 and 60 degrees Celsius when not in use.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Compare with related modules

GE QuickPanel Operator Interfaces — IC755 Series Compared (Set 2)