IC755CSS12CDB

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC755CSS12CDB is a Human Machine Interface (HMI) in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As a human machine interface (hmi), the IC755CSS12CDB is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC755CSS12CDB, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC755CSS12CDB (opens in a new tab)

Frequently Asked Questions

What is the IC755CSS12CDB?

The IC755CSS12CDB is a human machine interface (hmi) in the Quickpanel range from GE. It is described by the manufacturer as: Human Machine Interface (HMI).

What are the key technical ratings of the IC755CSS12CDB?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC755CSS12CDB mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC755CSS12CDB compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC755CSS12CDB?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC755CSS12CDB is a QuickPanel+ device that is manufactured by Emerson Automation, formerly by GE Fanuc Automation. It features a Windows Compact Embedded (CE) version 7 operating system with 12-inch TFT colored display screen with resolution of 800 x 600. It has a multi-touch interface and Freescale i.MX535 1GHz processor with 1GB DDR3 SDRAM; 512MB SLC NAND Flash and 512KB Battery Backed SRAM. For communication, it is provided with Two (2) Ethernet interface, One (1) Serial port supporting RS232 and One (1) RS485 port. It is also provided with Three (3) USB Interfaces.

Description

Note	The IC755CSS12CDB is a QuickPanel+ device that is currently manufactured by Emerson Automation. This product has compact assembly and able to function as a Human Machine Interface (HMI), a Programmable Logic Controller (PLC), a process controller, machine gateway and data historian. The IC755CSS12CDB is powered by an input supply voltage of 12-30 VDC with maximum power consumption of 30 Watts. It has a graphic display measuring 12 inches and resolution of 800 x 600 pixels with dedicated 2D / 3D graphics accelerator and NEON SIMD Media accelerator while the provided operator interface is a projected 2-point capacitive touch screen interface. The IC755CSS12CDB hosts a Microsoft Windows Compact Embedded (CE) version 7 Operating System (OS). It is equipped with an Freescale i.MX535 processor with clockspeed of 1GHz. This OS enables a variety of PC like function such as remote connectivity using VNC, web browser, intranet, SNMP, File Transfer Protocol (FTP) and HTTP. To function as a controller, the IC755CSS12CDB supports the defined programming language by IEC 61131-3 which are Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL) and Sequential Function Chart (SFC). With the same database located within the same hardware, integration and communication is greatly simplified. The integrated memory of this operator interface is composed of 1GB DDR3 SDRAM; 512MB SLC NAND Flash and a 512KB Battery Backed SRAM. Communication interfaces available to this aligns to the current popular protocol which is Ethernet, having 2 Fast Ethernet ports that supports 10/100 mbps transmission speed. It also has 2 serial interfaces, 1 port being a dedicated RS232 interface while the other an RS485 communication port. The IC755CSS12CDB terminal is a plug and play Quickpanel operator interface terminal manufactured by GE Fanuc. It has a screen size of 12.3 inches. It is used as a monitoring device for industrial automation applications. It is part of the GE Quickpanel series. The screen is a color TFT panel with a native resolution of 800 x 600 pixels. It uses 1 GB of memory for the DRAM. It is a highly efficient device and it features a serial port for faster communication. It supports RS 232 communication on COM 1 and RS 422, 485, and 232 communication on COM 2 for the local network. The IC755CSS12CDB terminal supports memory expansion by using the SDHC card. It has a compact form factor and it is only 13.27 inches in width, 10.35 inches in height, and 2.76 inches in depth. The operator panel consumes a total of 30 Watts of power during normal operation. The operating temperature should not exceed 55 degrees Celsius to avoid thermal deration. The IC755CSS12CDB terminal is a processor-based operator interface terminal. It comes with an ARM cortex A8 processor for all of the logical operations. This color terminal panel is also equipped with USB ports to connect peripheral devices. A single audio out port is also available in this terminal variant. The operator terminal is bundled with the Microsoft Windows 7 operating system for interfacing with the operators easily. The IC755CSS12CDB terminal meets all the industrial and environment compliance standards and is listed with the UL standard. The enclosure of the terminal is certified with an IP 65 protection rating. The interface terminal can be easily mounted by using a mounting gasket.

Note

The IC755CSS12CDB is a QuickPanel+ device that is currently manufactured by Emerson Automation. This product has compact assembly and able to function as a Human Machine Interface (HMI), a Programmable Logic Controller (PLC), a process controller, machine gateway and data historian. The IC755CSS12CDB is powered by an input supply voltage of 12-30 VDC with maximum power consumption of 30 Watts. It has a graphic display measuring 12 inches and resolution of 800 x 600 pixels with dedicated 2D / 3D graphics accelerator and NEON SIMD Media accelerator while the provided operator interface is a projected 2-point capacitive touch screen interface. The IC755CSS12CDB hosts a Microsoft Windows Compact Embedded (CE) version 7 Operating System (OS). It is equipped with an Freescale i.MX535 processor with clockspeed of 1GHz. This OS enables a variety of PC like function such as remote connectivity using VNC, web browser, intranet, SNMP, File Transfer Protocol (FTP) and HTTP. To function as a controller, the IC755CSS12CDB supports the defined programming language by IEC 61131-3 which are Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST), Instruction List (IL) and Sequential Function Chart (SFC). With the same database located within the same hardware, integration and communication is greatly simplified. The integrated memory of this operator interface is composed of 1GB DDR3 SDRAM; 512MB SLC NAND Flash and a 512KB Battery Backed SRAM. Communication interfaces available to this aligns to the current popular protocol which is Ethernet, having 2 Fast Ethernet ports that supports 10/100 mbps transmission speed. It also has 2 serial interfaces, 1 port being a dedicated RS232 interface while the other an RS485 communication port. The IC755CSS12CDB terminal is a plug and play Quickpanel operator interface terminal manufactured by GE Fanuc. It has a screen size of 12.3 inches. It is used as a monitoring device for industrial automation applications. It is part of the GE Quickpanel series. The screen is a color TFT panel with a native resolution of 800 x 600 pixels. It uses 1 GB of memory for the DRAM. It is a highly efficient device and it features a serial port for faster communication. It supports RS 232 communication on COM 1 and RS 422, 485, and 232 communication on COM 2 for the local network. The IC755CSS12CDB terminal supports memory expansion by using the SDHC card. It has a compact form factor and it is only 13.27 inches in width, 10.35 inches in height, and 2.76 inches in depth. The operator panel consumes a total of 30 Watts of power during normal operation. The operating temperature should not exceed 55 degrees Celsius to avoid thermal deration. The IC755CSS12CDB terminal is a processor-based operator interface terminal. It comes with an ARM cortex A8 processor for all of the logical operations. This color terminal panel is also equipped with USB ports to connect peripheral devices. A single audio out port is also available in this terminal variant. The operator terminal is bundled with the Microsoft Windows 7 operating system for interfacing with the operators easily. The IC755CSS12CDB terminal meets all the industrial and environment compliance standards and is listed with the UL standard. The enclosure of the terminal is certified with an IP 65 protection rating. The interface terminal can be easily mounted by using a mounting gasket.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Compare with related modules

GE QuickPanel Operator Interfaces — IC755 Series Compared (Set 2)