IC755CSS06RDA

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC755CSS06RDA is an Operator Terminals in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As an operator terminals, the IC755CSS06RDA is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC755CSS06RDA, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC755CSS06RDA (opens in a new tab)

Frequently Asked Questions

What is the IC755CSS06RDA?

The IC755CSS06RDA is an operator terminals in the Quickpanel range from GE. It is described by the manufacturer as: Operator Terminals.

What are the key technical ratings of the IC755CSS06RDA?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC755CSS06RDA mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC755CSS06RDA compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC755CSS06RDA?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC755CSS06RDA is a QuickPanel+ Operator terminal. It is part of the Visualization product catalog that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). It functions as a Human Machine Interface (HMI), featuring an embedded display measuring 6-inch TFT LCD screen with resolution of 320 x 240 pixels. It comes with a resistive touchscreen interface and an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor. The integrated memory available to this HMI includes 512 MB DDR2 SDRAM; 256 MB SLC NAND Flash and 512 KB SRAM. For communication, this device has One (1) Ethernet, and One (1) RS232 communication ports. This terminal operates at an input supply voltage of 24 VDC.

Description

Note	The IC755CSS06RDA is a QuickPanel+ operator terminal that is formerly manufactured by GE Intelligent platforms (GE IP), now under Emerson Automation. This operator terminal is mainly used for implementing real-time machine or process visualization as this Human Machine Interface (HMI) can be downloaded with a custom designed graphics that represents the monitoring and control points of the system. This provides a highly-customizable interface that suits the requirement of the application. The IC755CSS06RDA is a has a 6-inch Liquid Crystal Display (LCD) with resolution of 320 x 240 pixels. Along this colored screen are an array of analog-resistive touch cells that allows direct input of operator commands such as navigation, modifying of variables, control commands and other configurable actions. To send and receive data to and from the partner Programmable Logic Controller (PLC), this HMI has built-in One (1) RJ45 port for Ethernet I/P connectivity that supports 10/100 mbps transmission speed at maximum cable distance of 100 meters per segment. It also has One (1) 5-pin RS232 port that can be used for a maximum cable distance of 15 meters. Aside from communication interfaces, the IC755CSS06RDA has a total of Three (3) USB ports that is comprised of two (2) USB 2.0 Type A and one (1) USB 2.0 mini type-B interface. It is also provided with a removable storage card that is compatible for SD / SDHC card slot. This HMI has a Windows Compact Embedded 7 operating system that provides a user-friendly configuration environment. This operating system also enables some standard windows tools and networking capabilities such as command prompt, File Transfer Protocol (FTP) and SNTP server. The IC755CSS06RDA terminal is designed by GE Fanuc and it is part of the Quickpanel+ series. This kind of terminal is made to be used within industrial environments and it is an important tool for informing the operators about an application process and for providing the operators with all the necessary information about the operating status of the whole system. The unit is built for power sources with an input voltage of 24 Volts DC and it consumes 15 Watts of power maximum. The IC755CSS06RDA terminal has a 6-inch TFT LCD screen equipped with an LED backlight for high visibility. The resolution of this rugged and reliable display is 800 x 480 pixels. The terminal has a Freescale i.MX535 ARM Cortex A8 processor that runs on 1 gigahertz and a DDR2 RAM with a capacity of 512 megabytes. The additional memory includes 256 megabytes of SLC NAND ROM and 512 kilobytes of SRAM. The IC755CSS06RDA operator interface terminal is equipped with multiple communication ports, including a 10/100BaseT Ethernet port (RJ-45), an RS-232 UART serial port, and 3 USB 2.0 ports. In addition to that, the IC755CSS06RDA operator interface terminal has a card slot that accepts SD or SDHC memory cards for storage. The dimensions of the operator interface are 192 x 137 x 36 millimeters (7.5 x 5.3 x 1.4 inches). The unit is designed for panel mounting but it can be also mounted with VESA mounting. The weight of the unit is around 0.8 kilograms or 1.7 pounds. The unit can be installed in environments with humidity levels of up to 85% and it allows for an operating temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit).

Note

The IC755CSS06RDA is a QuickPanel+ operator terminal that is formerly manufactured by GE Intelligent platforms (GE IP), now under Emerson Automation. This operator terminal is mainly used for implementing real-time machine or process visualization as this Human Machine Interface (HMI) can be downloaded with a custom designed graphics that represents the monitoring and control points of the system. This provides a highly-customizable interface that suits the requirement of the application. The IC755CSS06RDA is a has a 6-inch Liquid Crystal Display (LCD) with resolution of 320 x 240 pixels. Along this colored screen are an array of analog-resistive touch cells that allows direct input of operator commands such as navigation, modifying of variables, control commands and other configurable actions. To send and receive data to and from the partner Programmable Logic Controller (PLC), this HMI has built-in One (1) RJ45 port for Ethernet I/P connectivity that supports 10/100 mbps transmission speed at maximum cable distance of 100 meters per segment. It also has One (1) 5-pin RS232 port that can be used for a maximum cable distance of 15 meters. Aside from communication interfaces, the IC755CSS06RDA has a total of Three (3) USB ports that is comprised of two (2) USB 2.0 Type A and one (1) USB 2.0 mini type-B interface. It is also provided with a removable storage card that is compatible for SD / SDHC card slot. This HMI has a Windows Compact Embedded 7 operating system that provides a user-friendly configuration environment. This operating system also enables some standard windows tools and networking capabilities such as command prompt, File Transfer Protocol (FTP) and SNTP server. The IC755CSS06RDA terminal is designed by GE Fanuc and it is part of the Quickpanel+ series. This kind of terminal is made to be used within industrial environments and it is an important tool for informing the operators about an application process and for providing the operators with all the necessary information about the operating status of the whole system. The unit is built for power sources with an input voltage of 24 Volts DC and it consumes 15 Watts of power maximum. The IC755CSS06RDA terminal has a 6-inch TFT LCD screen equipped with an LED backlight for high visibility. The resolution of this rugged and reliable display is 800 x 480 pixels. The terminal has a Freescale i.MX535 ARM Cortex A8 processor that runs on 1 gigahertz and a DDR2 RAM with a capacity of 512 megabytes. The additional memory includes 256 megabytes of SLC NAND ROM and 512 kilobytes of SRAM. The IC755CSS06RDA operator interface terminal is equipped with multiple communication ports, including a 10/100BaseT Ethernet port (RJ-45), an RS-232 UART serial port, and 3 USB 2.0 ports. In addition to that, the IC755CSS06RDA operator interface terminal has a card slot that accepts SD or SDHC memory cards for storage. The dimensions of the operator interface are 192 x 137 x 36 millimeters (7.5 x 5.3 x 1.4 inches). The unit is designed for panel mounting but it can be also mounted with VESA mounting. The weight of the unit is around 0.8 kilograms or 1.7 pounds. The unit can be installed in environments with humidity levels of up to 85% and it allows for an operating temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit).

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Compare with related modules

GE QuickPanel Operator Interfaces — IC755 Series Compared (Set 1)