IC755CKS10CDMEP
GE
Overview
The IC755CKS10CDMEP is a Quickpanel terminal with RSTi-EP Modbus TCP in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a quickpanel terminal with rsti-ep modbus tcp, the IC755CKS10CDMEP is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include a 12 / 24 Volts DC rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755CKS10CDMEP, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755CKS10CDMEP (opens in a new tab)
Frequently Asked Questions
What is the IC755CKS10CDMEP?
The IC755CKS10CDMEP is a quickpanel terminal with rsti-ep modbus tcp in the Quickpanel range from GE. It is described by the manufacturer as: Quickpanel terminal with RSTi-EP Modbus TCP.
What are the key technical ratings of the IC755CKS10CDMEP?
Its published highlights include 12 / 24 Volts DC. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC755CKS10CDMEP mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755CKS10CDMEP compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755CKS10CDMEP?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC755CKS10CDMEP terminal is a GE Fanuc Quickpanel terminal with an RSTi-EP Modbus TCP. The size of the display on the IC755CKS10CDMEP terminal is 10 inches.
Description
| Note | The GE Fanuc IC755CKS10CDMEP terminal is a Quickpanel+ 10-inch terminal with the RSTi-EP Modbus TCP. The IC755CKS10CDMEP terminal is based on the Freescale i.MX535 1 Gigahertz microprocessor which is based on the ARM Cortex A8. The processor supports 2D and 3D graphics processing, 32 KB of Level 1 instruction/data cache, 256 KB of Level 2 unified instruction/data cache, a NEON SIMD media accelerator ,and a vector floating point coprocessor. The IC755CKS10CDMEP terminal supports 1 GB of DDR3 SDRAM, 512 MB of SLC Flash memory, and 512 KB of SRAM (battery-backed). The IC755CKS10CDMEP terminal has a 10-inch display which supports an 800 x 600 resolution. The capacitive touchscreen display can be used for operator input and it supports 2-point multi-touch control. The maximum power consumption of the unit is 30 Watts. The IC755CKS10CDMEP terminal can be operated from either a 12 Volts DC or a 24 Volts DC power source. The integrated communications options include two 10/100 BaseT Ethernet ports, one RS-232 serial port, one RS-485 serial port, and 3 USB ports. The operating system is the Microsoft Windows Embedded Compact 7operating system. The dimensions of the terminal are 278 x 222 x 65 millimeters and the approximate weight of the unit is 2.4 kilograms. A cutout measuring 266 x 210 millimeters is required for the installation of the IC755CKS10CDMEP terminal. Mounting gaskets and panel mounting brackets are included with the terminal. The IC755CKS10CDMEP terminal uses natural convection cooling. GE Fanuc recommends that the ambient temperature around the terminal should be maintained within the range of 0 to 55 degrees Celsius. The IC755CKS10CDMEP terminal complies with the ATEX, CE, FCC part 15, UL Type 4X, and IP65F standards. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.