IC755CBS12CDB

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC755CBS12CDB is a Quickpanel+ terminal in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As a quickpanel+ terminal, the IC755CBS12CDB is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC755CBS12CDB, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC755CBS12CDB (opens in a new tab)

Frequently Asked Questions

What is the IC755CBS12CDB?

The IC755CBS12CDB is a quickpanel+ terminal in the Quickpanel range from GE. It is described by the manufacturer as: Quickpanel+ terminal.

What are the key technical ratings of the IC755CBS12CDB?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC755CBS12CDB mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC755CBS12CDB compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC755CBS12CDB?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC755CBS12CDB is a QuickPanel+ Operator terminal with blank bezel. It is part of the Visualization product catalog that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). It functions as a Human Machine Interface (HMI), featuring an embedded 12.1-inch Standard TFT LCD screen with resolution of 800 x 600 pixels. (SVGA). It comes with a projected capacitive touchscreen and Two (2) point multi-touch operator interface; It has an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor and integrated memory that is comprised of 1 GB DDR3 SDRAM; 512 MB SLC NAND ROM and 512 KB SRAM. For communication, this device has One (1) Ethernet, One (1) RS232 UART and One (1) RS232 / RS45 communication ports. This terminal operates at an input supply voltage of 24 VDC.

Description

Note	The IC755CBS12CDB is an operator terminal from Emerson Automation, formerly manufactured by GE Intelligent Platforms (GE IP). This operator terminal, typically referred to as a Human Machine Interface (HMI) mainly features a 12-inch, colored screen with screen resolution of 600 x 800 pixels. This HMI device is mainly used to provide machine or process visualization, designed with a custom graphic representation that represents the monitoring and control points of the connected control system. This HMI graphics published to this device is typically integrated to a programmable Logic Controller (PLC) which hosts the addresses and live data that is being represented by the graphic visualization available to the HMI. To implement data integration with a partner PLC, the IC755CBS12CDB is provided with a variety of communication interfaces particularly, Two (2) Ethernet interface with each port supporting 10/100 mbps of transmission speed at a maximum distance of 100 mbps per segment. In addition, One (1) RS232 UART port and One (1) RS232 / 485 combo port is also provided that may be used for point-to-point and multi-node communication. This operator terminal also comes without a blank bezel, which is a popular choice by Original Equipment Manufacturers (OEM) for specific branding and promotion of capabilities. OEMs may print and mount their own logo to the HMI’s blank bezel. This HMI is provided with a touch input interface. This enables users to directly interact with the control system by means of touch actions and gestures. It is also equipped with an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor and integrated memory that is comprised of 1 GB DDR3 SDRAM; 512 MB SLC NAND ROM and 512 KB SRAM. The IC755CBS12CDB terminal is a Quickpanel+ industrial operator terminal. The bezel on the terminal is blank. Quickpanel+ terminals support the plug and play feature, which enables their use with I/O and controllers from multiple vendors. In addition to supporting the attachment of external media, the USB ports also support the USB to serial, USB to WiFi, and USB to Ethernet protocols. Serial ports RS-232 and RS-485 support the ASCII slave, SNP slave, and Modbus RTU slave and application-specific protocols. The Ethernet ports support multiple link layer, Internet layer, transport layer, and application layer protocols, and some of the supported protocols include the LLDP, IPv4, IPv6, TCP, IDP, Profinet I/O, Telnet server, and SNTP protocols. Five IEC programming languages are supported, including the structured text, function block diagram, instruction list, relay ladder, and sequential function chart programming languages. The IC755CBS12CDB terminal uses a 1 Gigahertz A8 CPU from ARM, it includes 1 GB of RAM, and it runs the Windows Embedded Compact 7 operating system. The display is a 12-inch TFT LCD which supports the projected capacitive touch. Two Ethernet ports, 2 serial ports, and 3 USB ports are available on the terminal for communication. Both serial ports have a 5-pin connector. Both +12 Volts DC and +24 Volts DC can be used to power the IC755CBS12CDB terminal. The power consumption rating can reach a maximum of 30 Watts. The physical specifications for the IC755CBS12CDB terminal include dimensions of 314 x 248 x 65 millimeters and 3 kilograms of weight. The cooling methodology employed by the terminal is natural convection cooling. For optimal performance, the ambient temperature around the IC755CBS12CDB terminal should be kept between 0 and 55 degrees Celsius.

Note

The IC755CBS12CDB is an operator terminal from Emerson Automation, formerly manufactured by GE Intelligent Platforms (GE IP). This operator terminal, typically referred to as a Human Machine Interface (HMI) mainly features a 12-inch, colored screen with screen resolution of 600 x 800 pixels. This HMI device is mainly used to provide machine or process visualization, designed with a custom graphic representation that represents the monitoring and control points of the connected control system. This HMI graphics published to this device is typically integrated to a programmable Logic Controller (PLC) which hosts the addresses and live data that is being represented by the graphic visualization available to the HMI. To implement data integration with a partner PLC, the IC755CBS12CDB is provided with a variety of communication interfaces particularly, Two (2) Ethernet interface with each port supporting 10/100 mbps of transmission speed at a maximum distance of 100 mbps per segment. In addition, One (1) RS232 UART port and One (1) RS232 / 485 combo port is also provided that may be used for point-to-point and multi-node communication. This operator terminal also comes without a blank bezel, which is a popular choice by Original Equipment Manufacturers (OEM) for specific branding and promotion of capabilities. OEMs may print and mount their own logo to the HMI’s blank bezel. This HMI is provided with a touch input interface. This enables users to directly interact with the control system by means of touch actions and gestures. It is also equipped with an Intel Freescale i.MX535 1 GHz ARM Cortex A8 processor and integrated memory that is comprised of 1 GB DDR3 SDRAM; 512 MB SLC NAND ROM and 512 KB SRAM. The IC755CBS12CDB terminal is a Quickpanel+ industrial operator terminal. The bezel on the terminal is blank. Quickpanel+ terminals support the plug and play feature, which enables their use with I/O and controllers from multiple vendors. In addition to supporting the attachment of external media, the USB ports also support the USB to serial, USB to WiFi, and USB to Ethernet protocols. Serial ports RS-232 and RS-485 support the ASCII slave, SNP slave, and Modbus RTU slave and application-specific protocols. The Ethernet ports support multiple link layer, Internet layer, transport layer, and application layer protocols, and some of the supported protocols include the LLDP, IPv4, IPv6, TCP, IDP, Profinet I/O, Telnet server, and SNTP protocols. Five IEC programming languages are supported, including the structured text, function block diagram, instruction list, relay ladder, and sequential function chart programming languages. The IC755CBS12CDB terminal uses a 1 Gigahertz A8 CPU from ARM, it includes 1 GB of RAM, and it runs the Windows Embedded Compact 7 operating system. The display is a 12-inch TFT LCD which supports the projected capacitive touch. Two Ethernet ports, 2 serial ports, and 3 USB ports are available on the terminal for communication. Both serial ports have a 5-pin connector. Both +12 Volts DC and +24 Volts DC can be used to power the IC755CBS12CDB terminal. The power consumption rating can reach a maximum of 30 Watts. The physical specifications for the IC755CBS12CDB terminal include dimensions of 314 x 248 x 65 millimeters and 3 kilograms of weight. The cooling methodology employed by the terminal is natural convection cooling. For optimal performance, the ambient temperature around the IC755CBS12CDB terminal should be kept between 0 and 55 degrees Celsius.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Compare with related modules

GE QuickPanel Operator Interfaces — IC755 Series Compared (Set 1)