IC755ACCBATTNL
GE
Overview
The IC755ACCBATTNL is a Replacement battery pack in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a replacement battery pack, the IC755ACCBATTNL is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755ACCBATTNL, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755ACCBATTNL (opens in a new tab)
Frequently Asked Questions
What is the IC755ACCBATTNL?
The IC755ACCBATTNL is a replacement battery pack in the Quickpanel range from GE. It is described by the manufacturer as: Replacement battery pack.
What are the key technical ratings of the IC755ACCBATTNL?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC755ACCBATTNL mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755ACCBATTNL compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755ACCBATTNL?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Fanuc IC755ACCBATTNL pack is a replacement battery pack for 10, 12, and 15-inch Quickpanel+ terminals. Only the IC755ACCBATTNL pack should be used for replacing batteries on these Quickpanel+ units.
Description
| Note | The IC755ACCBATTNL pack is a replacement battery pack for 10-inch, 12-inch, and 15-inch Quickpanel+ industrial operator terminals from GE Fanuc. All of these Quickpanel+ terminals come with 512 KB of battery-backed SRAM which is used to store valuable data. The IC755ACCBATTNL pack can be used to replace the pre-installed batteries on the terminals which degrade over time due to repeated charging and discharging and which eventually become unable to provide backup power to the SRAM for the appropriate amount of time. Batteries on the different terminals should only be replaced with the IC755ACCBATTNL pack. The 7 screws on the back cover of the terminal need to be removed before the battery can be replaced. Then the back cover needs to be released by gently pressing on either side of the tab. After that, the back cover can be removed by lifting it up. After performing the above-mentioned steps, the old battery will be exposed. This coin battery can then be removed and replaced with a new one from the IC755ACCBATTNL pack battery while taking care to ensure that the new battery is installed with the correct polarity. Finally the back cover can be replaced and the screws can be tightened to secure it in place. Faulty batteries should be disposed of as per local and state regulations. To minimize the risk of fire and explosions, these lithium coin batteries should not be crushed, disassembled, short-circuited, or disposed of in a fire. The replacement activity should be only be performed by experienced and trained technical personnel in a non-hazardous location. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.