IC755ACC15MNT
GE
Overview
The IC755ACC15MNT is an Accessory kit in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an accessory kit, the IC755ACC15MNT is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755ACC15MNT, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755ACC15MNT (opens in a new tab)
Frequently Asked Questions
What is the IC755ACC15MNT?
The IC755ACC15MNT is an accessory kit in the Quickpanel range from GE. It is described by the manufacturer as: Accessory kit.
What are the key technical ratings of the IC755ACC15MNT?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC755ACC15MNT mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755ACC15MNT compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755ACC15MNT?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC755ACC15MNT kit is a Quickpanel accessory kit from GE Fanuc. The IC755ACC15MNT kit contains power and serial port connectors and mounting clips.
Description
| Note | The GE Fanuc IC755ACC15MNT kit is a Quickpanel accessory kit which contains replacement mounting clips, serial port connectors, and power connectors. The IC755ACC15MNT kit is compatible with Quickpanel+ units that come with 15-inch displays. Quickpanel and Quickpanel+ units are ARM microprocessor-powered industrial operator terminals that run the Embedded Compact 7 version of Microsoft Windows. The power connector on these units is a Tyco Electronics 284510-3 connector which can be used for both +24 Volts DC or +12 Volts DC inputs. The RS-232 serial port connector is a Tyco Electronics 284510-5 connector which can be used with AWG 30 to AWG 14 wires rated for 167 degrees Fahrenheit. The recommended torque for attaching the screws is 0.3 N-m. Repeated retightening of the clips that are used for unit mounting can lead to gasket degradation and this should be avoided. The IC755ACC15MNT kit can be used to replace missing or damaged parts. The touchscreen display on the Quickpanel+ terminals that use the IC755ACC15MNT spare parts kit is based on projected capacitive touch technology and it supports 2-point multi-touch. 15-inch Quickpanel+ units feature a 15-inch TFT LCD screen with 1024 x 768 resolution, 65,536 colors, and 310 nits of brightness. The communications options include two 10/100BaseT Ethernet with an RJ-45 interface, one RS-232 port, one RS-232/485 interface, and 2 USB 2.0 interfaces which supply 5 Volts of power at 0.5 Amps. One lineout is provided for audio output. The noise immunity rating for the units is 1500 Volts peak to peak with 1 microsecond of pulse duration and 1 nanosecond of rise time. The Quickpanel units are rated for 30 Watts of power consumption. The current draw is 1.25 Amps at 24 Volts DC and 2.5 Amps at 12 Volts DC. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.