IC755ACC10GAS
GE
Overview
The IC755ACC10GAS is a Gasket in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a gasket, the IC755ACC10GAS is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Avoid condensation — the rated humidity is 85% RH (non-condensing) @ 30°C; store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755ACC10GAS, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755ACC10GAS (opens in a new tab)
Frequently Asked Questions
What is the IC755ACC10GAS?
The IC755ACC10GAS is a gasket in the Quickpanel range from GE. It is described by the manufacturer as: Gasket.
What are the key technical ratings of the IC755ACC10GAS?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC755ACC10GAS mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755ACC10GAS compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755ACC10GAS?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Faunc IC755ACC10GAS replacement gasket is made for the 10-inch Quickpanel+ terminals. It is a structure that provides support and enables the correct mounting of the terminals.
Description
| Note | The IC755ACC10GAS gasket is a replacement gasket for the 10-inch Quickpanel+ terminals manufactured by GE Fanuc. This gasket is meant to cover the module of the Quickpanel+ operator interface terminals and at the same time, it works as the structure that covers the screen and each port of the interface. The original gasket comes preinstalled in the operator interface terminal. Certain conditions and environments can cause the degradation of this gasket and that is the main reason why replacement gaskets have been included in the same series. The GE Fanuc IC755ACC10GAS replacement gasket for the 10-inch Quickpanel+ terminals needs to be properly seated in the bezel channel located on the sides of the unit. Space needs to be cut out from the gasket according to the dimensions of the terminal that it protects. The panel thickness goes from 1.6 to 5 millimeters. The GE Fanuc IC755ACC10GAS replacement gasket for the 10-inch Quickpanel+ terminals need to be secured by using screws that are tightened in a clockwise direction. To avoid degradation and wear on the GE Fanuc IC755ACC10GAS replacement gasket for the 10-inch Quickpanel+ terminals, it is recommended to avoid frequent insertions and removals of the panel and to perform periodic inspections to the mounting screws because these will need to be tightened up occasionally. The terminal needs to be inserted in the gasket without any connections, cables, or anything else attached to it that would prevent it from fitting into the gasket properly. It is also recommended to maintain the temperature and humidity levels around the gasket within the accepted range so that heat and water damages do not affect the gasket. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.