IC755ACC07MNT
GE
Overview
The IC755ACC07MNT is a Tyco Electronic 284539-3 in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a tyco electronic 284539-3, the IC755ACC07MNT is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755ACC07MNT, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755ACC07MNT (opens in a new tab)
Frequently Asked Questions
What is the IC755ACC07MNT?
The IC755ACC07MNT is a tyco electronic 284539-3 in the Quickpanel range from GE. It is described by the manufacturer as: Tyco Electronic 284539-3.
What are the key technical ratings of the IC755ACC07MNT?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC755ACC07MNT mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755ACC07MNT compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755ACC07MNT?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Fanuc IC755ACC07MNT kit is an accessory kit for the 7-inch Quickpanel+ terminals. It comes with a power connector, a serial port connector, and replacement mounting clips.
Description
| Note | The IC755ACC07MNT kit is an accessory kit for the GE Fanuc 7-inch Quickpanel+ terminals. This kit has been designed by GE Fanuc and it has been included in the Quickpanel+ series. This kit includes the replacement mounting clips that are used to mount the module properly and to secure the power and serial port connectors. The port connectors consist of one 5-pin connector that is made to be used with the RS-232 UART interface. This connector is one Euro terminal that consists of a Tyco Electronics 284539-5 connector, and its mating connector is the Tyco Electronics 284510 or equivalent connector. The GE Fanuc IC755ACC07MNT accessory kit for the 7-inch Quickpanel+ terminals also features a power connector. This connector comes with screw clamps and mounting clamps. To install the GE Fanuc IC755ACC07MNT accessory kit for the 7-inch Quickpanel+ terminals, it is important to ensure that the unit is completely powered off and disconnected first. The power cable needs to be secured to the mating connector, the polarity needs to be noted, and the screw clamps need to be tightened. Once the power connector has been attached to the unit, DC power can be applied. The GE Fanuc IC755ACC07MNT accessory kit for the 7inch Quickpanel+ terminals is used when the original cables have suffered degradation from daily operation or in order to have new connectors that ensure safe operations. The power connector features a 24 Volts DC interface. The ambient operating temperature rating of the whole system goes up to 50 degrees Celsius. Overheating must be avoided. This kit can be ordered from the GE Fanuc under the part number "IC755ACC07MNT." |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.