IC755ACC07GAS
GE
Overview
The IC755ACC07GAS is a Gasket in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a gasket, the IC755ACC07GAS is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Avoid condensation — the rated humidity is 85% RH (non-condensing) @ 30°C; store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC755ACC07GAS, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC755ACC07GAS (opens in a new tab)
Frequently Asked Questions
What is the IC755ACC07GAS?
The IC755ACC07GAS is a gasket in the Quickpanel range from GE. It is described by the manufacturer as: Gasket.
What are the key technical ratings of the IC755ACC07GAS?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC755ACC07GAS mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC755ACC07GAS compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC755ACC07GAS?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Fanuc IC755ACC07GAS replacement gasket is a structure on which the operator interface terminal can be mounted. It is compatible with the 7-inch Quickanel+ devices.
Description
| Note | The IC755ACC07GAS gasket is a replacement gasket for the Quickpanel+ series devices. This accessory has been included in the Quickpanel+ series of operator interfaces by GE Fanuc in the intelligent platforms division. This specific accessory is meant to replace the original gasket of an operator interface module. The original gasket comes pre-installed in the module and due to constant wear, it might need to be replaced. The GE Fanuc IC755ACC07GAS replacement gasket for the Quickpanel+ devices comes with 4 mounting holes on the top and bottom of the unit that are useful for securing the module to a surface. To avoid the degradation of the gasket, the insertions or removals of the unit need to be limited and the mounting clips need to be retightened occasionally. When installing the GE Fanuc IC755ACC07GAS replacement gasket for a Quickpanel+ device, it is important to know that the device needs to be inserted without any cable connected to it or it will not fit the gasket. The power supply also needs to be removed first. Once the device's power has been disconnected, the users need to verify that the GE Fanuc IC755ACC07GAS replacement gasket for the Quickpanel+ device is in the bezel channels located on the sides of the device. Then the gasket needs to be secured, and to be secured properly, it requires a torque range of 0.3 N-m. All the units in the Quickpanel+ series can operate in a temperature range of 0 to 50 degrees Celsius and at a maximum relative humidity level of 85 percent without condensation. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.