IC754VSI06STD
GE
Overview
The IC754VSI06STD is an Operator Panel in the Quickpanel range from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an operator panel, the IC754VSI06STD is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC754VSI06STD, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC754VSI06STD (opens in a new tab)
Frequently Asked Questions
What is the IC754VSI06STD?
The IC754VSI06STD is an operator panel in the Quickpanel range from GE. It is described by the manufacturer as: Operator Panel.
What are the key technical ratings of the IC754VSI06STD?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC754VSI06STD mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC754VSI06STD compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC754VSI06STD?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Fanuc is a IC754VSI06STD is a Human Machine Interface (HMI) device from the QuickPanel View product family. This HMI features a 6-inch Colored TFT screen, Touchscreen input interface, 32 MB Flash Memory, 512KB SRAM, 32 MB DRAM, 512KB Boot loader. It has One (1) Ethernet interface, One (1) Serial EIA232C/EIA485, DP25S combo port communication interfaces. It has Windows CE Operating System.
Description
| Note | The General Electric (GE) Fanuc Industrial microcomputer with part number IC754VSI06STD is a Human Machine Interface (HMI) device, capable of linking and providing operators with a convenient and centralized monitoring and control workstation within the factory floor. This computer supports flush mounting installation to industrial enclosures rated NEMA 4, 4x and 12 or IP65 equivalent enclosures. The IC754VSI06STD has a bezel made of Valox 357U with membrane material of Lexan HP60. The enclosure dimension is 4.86 in (126mm) x 6.14 in (158mm) x 2.76 in (70mm) and requires a panel cutout of 4.86” (H) x 6.14” W) while the bezel dimensions are 6.17” (156.7mm ) (H) x 8 in. (203.2mm) (W). It comes with a variety of communication interfaces such as One (1) RS232 / 422 / 485 combo port used for point-to-point or multi-drop communication. Aside from this, the IC754VSI06STD also supports modern communication protocol through the built-in Ethernet communication port that supports 10/100 Mbps that is capable of auto-negotiation. It has a 5.7” inch Passive STN transmissive (color) with 65,536 colors along a resolution of 320 x 240 pixels. It has a touch sensitive membrane enabling operators interact to the machine or process through directly touching an area of the screen where a runtime object or icon is situated. This input method provides more convenience and contributes to faster operator response time. The IC754VSI06STD has a configuration and maintenance environment running a Windows CE Operating System. The HMI application that is processed by the IC754VSI06STD must be developed using the Proficy Machine Edition programming software. The IC754VSI06STD module operates at 24 Volts DC (in a 10.8 to 30 Volts DC voltage range) input and it consumes a maximum of 24 Watts of power. Two LEDs are provided for status information and to aid in troubleshooting: one bi-color LED for power and one tri-color LED which is user-programmable. The dimensions of the IC754VSI06STD module are 157 x 203 x 22 millimeters and it requires a cut-out with dimensions of 12 x 158 x 70 millimeters for installation. The IC754VSI06STD module is available in an IP65 rated NEMA 4/12/4X enclosure. The operating temperature range is from 32 to 140 degrees Fahrenheit and 10 to 90% is the ambient operating relative humidity range. Agency approvals for the IC754VSI06STD include the CE Mark, ATEX (Class 1, Zone 2) and the UL-Class 1 Division 2 (A, B, C, D). |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.