IC697MDL753
GE
Overview
The IC697MDL753 is an automation component from GE. The IC697MDL753 module is a negative logic output module with 32 output points. The module has a rated voltage of 5 Volts DC and an output voltage range of 10 t.
Application & Technical Notes
As an automation component, the IC697MDL753 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include a range 5 Volts DC or 10 to 60 Volts DC rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC697MDL753, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC697MDL753 (opens in a new tab)
Frequently Asked Questions
What is the IC697MDL753?
The IC697MDL753 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC697MDL753?
Its published highlights include range 5 Volts DC or 10 to 60 Volts DC. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC697MDL753 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC697MDL753 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC697MDL753?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The IC697MDL753 module is a negative logic output module with 32 output points. The module has a rated voltage of 5 Volts DC and an output voltage range of 10 to 60 Volts DC. The module has a maximum inrush current of 5 Amps and a response time-on/off of 1 millisecond. Technical specifications for IC697MDL753 Brand GE Fanuc Series Series 90-70 Part Number IC697MDL753 Rated voltage 5 Volts DC / 10 to 60 Volts DC Output current 16 milliAmps at 5 Volts DC/0.5 Amps per point, 4 Amps per group at 10 to 60 Volts DC Output voltage range 5 Volts DC or 10 to 60 Volts DC Required current 0.25 Amps Number of outputs 32 Isolation voltage 1500 Volts Inrush current 5 Amps (maximum) for 20 milliseconds Response time-ON 1 millisecond (maximum) Response time-OFF 1 millisecond (maximum) Output voltage drop 1 Volt/2 Ohm (maximum) The IC697MDL753 module that is manufactured by GE Fanuc is a negative logic component that is available through GE Series 90-70. The series offers a wide range of programmable logic controller units and accessory parts that extend their capabilities. This output module provides status updates through LEDs that are placed on the top of the unit. The module is capable of operation on TTL levels and it is highly configurable for different tasks. The IC697MDL753 module has an MS-DOS-based configuration software that can be run on different versions of the Windows operating system. The module supports usage with devices like starters for motors, solenoid electromagnets, and others. The module can also select different faults modes for its outputs, thus providing greater overall control.
The IC697MDL753 module has 1 Volt/2 Ohms rated maximum drops in voltage for the outputs and it has a response time of 1 millisecond for either the on or the off state. The module is rated for 5 Volts DC voltage and a voltage range of 10 to 60 Volts DC. In addition to that, the rated current of the module is 0.25 Amps. The number of available outputs is 32. A common feature found on the IC697MDL753 module and many others in the series is that all the outputs are arranged in groups. The module can have up to 5 Amps of inrush current for a time period of 20 milliseconds and its output current includes 16 milliAmps at a voltage of 5 Volts DC. The current rating for a voltage range of 10 to 60 Volts DC is 0.5 Amps per point and 4 Amps per group.
Reproduced from the manufacturer's published data.