IC695PSD040
GE
Overview
The IC695PSD040 is a Power supply module from GE. It delivers stable control power at 5.1 VDC; 3.3 VDC for the GE product portfolio racks.
Application & Technical Notes
As a power supply module, the IC695PSD040 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It conditions and distributes the low-voltage supply that powers the controller, I/O and communication modules on the same rack.
Key published characteristics include a 5.1 VDC; 3.3 VDC rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Ensure adequate ventilation and do not overload the supply beyond its published current budget; consider redundancy for critical racks. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC695PSD040, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the output voltage and current to the GE product portfolio load and allow headroom for future expansion. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC695PSD040 (opens in a new tab)
Frequently Asked Questions
What is the IC695PSD040?
The IC695PSD040 is a power supply module from GE. It is described by the manufacturer as: Power supply module.
What are the key technical ratings of the IC695PSD040?
Its published highlights include 5.1 VDC; 3.3 VDC. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC695PSD040 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC695PSD040 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC695PSD040?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC695PSD040 is a power supply module that is part of the PACSystem RX3i platform, currently under Emerson Automation, formerly produced by GE Intelligent Platform (GE IP). This power supply mounts to an RX3i universal backplane. It has an input voltage range of 18-30 VDC for module Start and 12-30 VDC for Module Run with maximum input Power of 60 Watts at full load. It has an output power of 40 Watts; Output voltage of 5.1 VDC, 3.3 VDC, 24 VDC; Output current of 0-6 Amperes and 0-9 Amperes, respectively. Brand GE Fanuc Series PACSystem RX3i
Specifications
| Power Supply | 40 Watts |
|---|---|
| Input | Voltage Start: 18 to 30 VDC Run: 12 to 30 VDC |
| Output | Voltage 5.1 VDC; 3.3 VDC |
| Input | Power 60 Watts, maximum |
| Output | Current 5.1 VDC: 0 to 6 Amps 3.3 VDC: 0 to 9 Amps |
| Output | Power 40 Watts, maximum |
| Output | Voltage 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal); 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
| Output | Current 5.1 VDC: 0 to 6 Amps; 3.3 VDC: 0 to 9 Amps |
| Output | Power 40 Watts maximum total of both outputs: 5.1 VCD = 30 Watts maximum; 3.3 VDC = 30 Watts maximum |
| Isolation | None |
| Number of | Daisy-Chained PSD040 Two (2) |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.