IC695HSC308
GE
Overview
The IC695HSC308 is a High-speed counter module from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a high-speed counter module, the IC695HSC308 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include a Range 4.7 to 40 Volts DC rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC695HSC308, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC695HSC308 (opens in a new tab)
Frequently Asked Questions
What is the IC695HSC308?
The IC695HSC308 is a high-speed counter module from GE. It is described by the manufacturer as: High-speed counter module.
What are the key technical ratings of the IC695HSC308?
Its published highlights include Range 4.7 to 40 Volts DC. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC695HSC308 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC695HSC308 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC695HSC308?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC695HSC308 is a High- Speed Counter Module. It is part of the PACSystem RX3i platform, currently under Emerson Automation, formerly produced by GE Intelligent Platforms (GE IP). This module is mainly used in Turbine Flowmeter, meter proving, velocity measurement, material handling, Motion control and Process Control. It accepts input signals with maximum switching frequency of 1.5 Mhz via the embedded Eight (8) counters to the module which is comprised of 16 inputs and 14 outputs. This module has a counting range of -2147483648 to 2147483647. Brand GE Fanuc Series PACSystem RX3i
Specifications
| Compatibility | PACSystems RX3i |
|---|---|
| Compatibility | PACSystems RX3i |
| Number of | Counter Channels 8 counters |
| Output | Voltage Range 4.7 to 40 Volts DC |
| Power | Requirements 561 milliamps at 3.3 Volts DC, 94 milliamps at 5 Volts DC |
| Output | Voltage Range 4.7 to 40 Volts DC |
| Power | Requirements 561 milliamps at 3.3 Volts DC, 94 milliamps at 5 Volts DC |
| Input | Voltages 5VDC nominal: 4.7VDC to 5.5VDC; 12 to 24VDC nominal: 10VDC to 26.4VDC |
| Output | Voltage Range 4.7 to 40VDC |
| Output | Current Rating 1.5A maximum per channel; 10.5A maximum per module |
| Output | Delay time Off to On: 125uS @ 1.5A; On to Off: 85uS @ 1.5A |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.