IC695GCG001
GE
Overview
The IC695GCG001 is a Genius communications gateway module from GE. It extends the GE product portfolio connectivity through its onboard communication interface.
Application & Technical Notes
As a genius communications gateway module, the IC695GCG001 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It bridges the controller to higher-level networks, HMIs, SCADA and peer devices, carrying configuration, process data and diagnostics.
Key published characteristics include an operating temperature range of 0degrees C to 60degrees C. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0degrees C to 60degrees C); do not exceed it during commissioning or in enclosed panels without airflow. Confirm network addressing, baud/rate and topology match the rest of the system; keep firmware consistent across the cell. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC695GCG001, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the protocol, connector and topology to the rest of the GE product portfolio network and to the peer devices already installed. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC695GCG001 (opens in a new tab)
Frequently Asked Questions
What is the IC695GCG001?
The IC695GCG001 is a genius communications gateway module from GE. It is described by the manufacturer as: Genius communications gateway module.
What are the key technical ratings of the IC695GCG001?
Its published highlights include operating temperature 0degrees C to 60degrees C. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC695GCG001 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC695GCG001 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC695GCG001?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC695GCG001 is a PACSystems RX3i Genius communication gateway. This is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). This controller functions as Profinet and Genius I/O gateway, featuring Two (2) RJ45 communication interface and Two (2) Genius communication interface. It supports up to 31 Genius Block or devices and accommodates 1024 bytes of input data and 1024 bytes of output data per GCG. This gateway supports RTC – Real Time Cyclic Protocol, Class 1 and 2 (unsynchronized); RTA – Real Time Acyclic Protocol; DCP – Discovery and configuration Protocol; CL-RPC – Connectionless Remote Procedure Call; LLDP – Link Layer Discovery Protocol; MRP – Media Redundancy Protocol; SNMP – Simple Network Management Protocol.
Description
| Note | The IC695GCG001 is a Genius communication gateway. This module is part of the PACSystem RX3i that is primarily used to provide ethernet connectivity to any legacy, existing Genius bus system. This module is used to retain the functionalities of legacy modules that utilize the Genius bus and safely migrate the devices to modern control systems without totally decommissioning those. The IC695GCG001 is provided with Two (2) RJ45 communication interface that supports PROFINET and Two (2) Genius communication interface. Genius bus adapters from the existing I/O system are terminated to the IC695GCG001’s Genius ports. The PROFINET interface then virtually connects or bridges the connection between the PROFINET network and connected Genius capable modules. This module acts as the gateway between the 2 protocols, supporting up to 31 Genius blocks or devices and permitting 2048 bytes worth of I/O data, specifically, 1024 Input data and 1024 output data. This module supports standard and extended Genius Bus speeds, specifically, 153.6 kbps. Supported protocols by the IC695GCG001 are RTC – Real Time Cyclic Protocol, Class 1 and 2 (unsynchronized); RTA – Real Time Acyclic Protocol; DCP – Discovery and configuration Protocol; CL-RPC – Connectionless Remote Procedure Call; LLDP – Link Layer Discovery Protocol; MRP – Media Redundancy Protocol; SNMP – Simple Network Management Protocol. It also supports subset protocols including UDP, IP, ARP, and ICMP (Ping). Additionally, this module supports VLAN and priority tagging. The IC695GCG001 has configurable I/O update or production rate. Available software configurable time settings are 2ms, 4ms, 8ms, 16ms, 32ms, 128ms, 256ms, or 512ms. This module has maximum current draw of 24 VDC; 0.19 A and operating temperature of 0degrees C to 60degrees C. The IC695GCG001 module is a GE Fanuc RX3i PacSystems communications gateway module. The IC695GCG001 module enables interfacing between GE Profinet I/O controllers and Genius I/O devices on a Genius serial bus. The IC695GCG001 module scans connected Genius I/O devices, retrieves input data, and sends output data. The IC695GCG001 module then exchanges the I/O data with the Profinet I/O controller over Ethernet links. The IC695GCG001 module can manage up to 31 Genius I/O devices on any particular Genius I/O bus. The IC695GCG001 module can also operate as an I/O device which allows it to be controlled by RX3i Profinet controllers. In such instances, the IC695GCG001 module is able to control PLC. The IC695GCG001 module is only compatible with the GE Profinet I/O controllers. The IC695GCG001 module can be set up in a redundant configuration. Two Ethernet ports with RJ-45 interfaces are provided on the IC695GCG001 module. The module supports both star and linear network topologies. The IC695GCG001 module supports Ethernet Media Redundancy Protocol (MRP). The IC695GCG001 module is typically installed in a panel mount. An optional mounting kit for RX3i expansion slots is also available. The module requires an external 24 Volts DC power supply and it draws 0.2 Amps of current. The IC695GCG001 module supports hot-swapping. However, hot-swapping requires the disconnection of the external power supply. The recommended ambient operating temperature range is 0 to 60 degrees Celsius. An SD card is supported on the module and it can be used for 2 applications, including the backup of the Ethernet configuration data and loading new module firmware. The IC695GCG001 module supports one Genius bus and the ports that are the Serial 1, Serial 2, Shield In, and Shield Out ports are marked on the module’s front panel. |
|---|
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.