IC695EDS001

Overview

The IC695EDS001 is a DNP3 outstation module from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As a dnp3 outstation module, the IC695EDS001 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC695EDS001, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC695EDS001 → (opens in a new tab)

Frequently Asked Questions

Specifications

The IC695EDS001 is an Ethernet DNP3 Slave / Outstation Module that is part of the PACSystem RX3i platform, currently under Emerson Automation, formerly produced by GE Intelligent Platform (GE IP). This module has One (1) Station Manager port provided by the 9-pin Dh-shell connector and Two (2) RJ45 Ethernet communication port supporting DNP3 Slave protocol. It enables communication of up to 12,072 points and 20,000 events and integration of Four (4) DNP3 data objects such as DI, DI w/time, DO, DO w/time, CROB, analog output values, time setting, and class polls and supports communication with up to Eight (8) DNP3 masters. Brand GE Fanuc Series RX3i PacSystem

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1

Compare with related modules

• GE Series 90-30 & RX3i — IC695 Series Compared (Set 2)