IC695CMM004
GE
Overview
The IC695CMM004 is a Communications module from GE. It extends the GE product portfolio connectivity through its onboard communication interface.
Application & Technical Notes
As a communications module, the IC695CMM004 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It bridges the controller to higher-level networks, HMIs, SCADA and peer devices, carrying configuration, process data and diagnostics.
Key published characteristics include an operating temperature range of 0 to 60 degrees Celsius. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0 to 60 degrees Celsius); do not exceed it during commissioning or in enclosed panels without airflow. Confirm network addressing, baud/rate and topology match the rest of the system; keep firmware consistent across the cell. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC695CMM004, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the protocol, connector and topology to the rest of the GE product portfolio network and to the peer devices already installed. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC695CMM004 (opens in a new tab)
Frequently Asked Questions
What is the IC695CMM004?
The IC695CMM004 is a communications module from GE. It is described by the manufacturer as: Communications module.
What are the key technical ratings of the IC695CMM004?
Its published highlights include operating temperature 0 to 60 degrees Celsius. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC695CMM004 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC695CMM004 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC695CMM004?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC695CMM004 is a PACSystem RX3i Serial Communication module that is formerly manufactured by GE Intelligent Platforms (GE IP) now under Emerson Automation. This module comes with Four (4) independent RJ-45 serial ports that support RS-232 or RS-485/22 communication, configurable for 4-wire (full duplex) or 2-wire (half-duplex) operation. Up to Six (6) instances of this module is permitted in the CPU backplane. Each port of this module are configurable for MODBUS Master, MODBUS Slave, CCM Slave, DNP3 Master, DNP3 Slave, or Serial I/O protocol and comes with 500 VDC, continuous and 710 VDC for 1 minute isolation rating. Brand GE Fanuc Series PACSystem RX3i
Specifications
| Power | Requirements 0.7 Amps at 3.3 Volts DC, 0.15 Amps at 5 Volts DC |
|---|---|
| Status | LED indicators Module OK, Port Fault, Port Status |
| Certifications | CE, UL/CUL 508, ATEX |
| Operating Temperature | 0 to 60 degrees Celsius |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.