IC695ALG106

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC695ALG106 is an Analog Input Module from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As an analog input module, the IC695ALG106 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It converts field signals (sensors, switches, transmitters) into the digital or analogue values the controller processes, forming the acquisition layer of the automation scheme.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC695ALG106, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC695ALG106 (opens in a new tab)

Frequently Asked Questions

What is the IC695ALG106?

The IC695ALG106 is an analog input module from GE. It is described by the manufacturer as: Analog Input Module.

What are the key technical ratings of the IC695ALG106?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC695ALG106 mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC695ALG106 compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC695ALG106?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC695ALG106 is a PACSYstem RX3i Programmable Automation Controller (PAC), analog input module. This module is formerly manufactured by GE Intelligent Platforms (GE IP), now under Emerson Automation. This module features Six (6) isolated inputs individually configurable to receive voltage and current signals specifically, +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V and 0-20 mA, 4-

Description

Note	The IC695ALG106 is a PACSystem RX3i analog input module. This module features Six (6) isolated analog input channels that accept of variety of voltage and current standard signals such as +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V, and 0-20 mA, 4-20 mA and +/-20 mA, Voltage and Current signals, respectively. The IC695ALG106 has backplane current draw of 230 mA maximum @ 5.0V +5% / -2.5% and 320 mA maximum @ 3.3V +5% / -3%. From the isolated power supply, it has a current draw of 500 mA @ 19.2 V to 30 VDC. It can operate with PACSystem RX3i module with Central Processing Unit (CPU) version 5.0 or later. For configuration and programming of the module, applicable programming software is Proficy Machine Edition version 5.6 SP11 and later. The Machine Edition version 5.6 SP11 and later has a built-in analog to digital converter (ADC) with a conversion resolution of 16 bits with data converted to Floating-Point IEEE 32 bit or 16-bit integer in a 32-bit field register. Each input channel has configurable filter options specifically 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, and 1000Hz. The module’s scan time is 1ms, regardless of the filter setting with varying settling times based on the configured filter options. Settling times include 127 mS at 8 Hz Filter; 67 ms at 12 Hz Filter; 56 mS at 16 Hz filter; 21 mS at 40 Hz filter; 3.1 mS at 250 Hz filter and 0 mS at 1000 Hz filter. The module’s calibrate accuracy is 0.1% of range at 25°C and 0.2% of the range over the entire temperature span. The IC695ALG106 is a PACSYstem RX3i Programmable Automation Controller (PAC), analog input module. This module is formerly manufactured by GE Intelligent Platforms (GE IP), now under Emerson Automation. This module features Six (6) isolated input individually configurable to receive voltage and current signals specifically, +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V and 0-20 mA, 4-20 mA and +/-20 mA, respectively. This module has 16-bit ADC converted to Floating Point or Integer.

Note

The IC695ALG106 is a PACSystem RX3i analog input module. This module features Six (6) isolated analog input channels that accept of variety of voltage and current standard signals such as +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V, and 0-20 mA, 4-20 mA and +/-20 mA, Voltage and Current signals, respectively. The IC695ALG106 has backplane current draw of 230 mA maximum @ 5.0V +5% / -2.5% and 320 mA maximum @ 3.3V +5% / -3%. From the isolated power supply, it has a current draw of 500 mA @ 19.2 V to 30 VDC. It can operate with PACSystem RX3i module with Central Processing Unit (CPU) version 5.0 or later. For configuration and programming of the module, applicable programming software is Proficy Machine Edition version 5.6 SP11 and later. The Machine Edition version 5.6 SP11 and later has a built-in analog to digital converter (ADC) with a conversion resolution of 16 bits with data converted to Floating-Point IEEE 32 bit or 16-bit integer in a 32-bit field register. Each input channel has configurable filter options specifically 8Hz, 12Hz, 16Hz, 40Hz, 250Hz, and 1000Hz. The module’s scan time is 1ms, regardless of the filter setting with varying settling times based on the configured filter options. Settling times include 127 mS at 8 Hz Filter; 67 ms at 12 Hz Filter; 56 mS at 16 Hz filter; 21 mS at 40 Hz filter; 3.1 mS at 250 Hz filter and 0 mS at 1000 Hz filter. The module’s calibrate accuracy is 0.1% of range at 25°C and 0.2% of the range over the entire temperature span. The IC695ALG106 is a PACSYstem RX3i Programmable Automation Controller (PAC), analog input module. This module is formerly manufactured by GE Intelligent Platforms (GE IP), now under Emerson Automation. This module features Six (6) isolated input individually configurable to receive voltage and current signals specifically, +/- 10V, 0 to 10V, +/- 5V, 0 to 5V, 1 to 5V and 0-20 mA, 4-20 mA and +/-20 mA, respectively. This module has 16-bit ADC converted to Floating Point or Integer.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.