IC694PWR330
GE
Overview
The IC694PWR330 is a Power Supply Module from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a power supply module, the IC694PWR330 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It conditions and distributes the low-voltage supply that powers the controller, I/O and communication modules on the same rack.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Ensure adequate ventilation and do not overload the supply beyond its published current budget; consider redundancy for critical racks. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC694PWR330, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Match the output voltage and current to the GE product portfolio load and allow headroom for future expansion. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC694PWR330 (opens in a new tab)
Frequently Asked Questions
What is the IC694PWR330?
The IC694PWR330 is a power supply module from GE. It is described by the manufacturer as: Power Supply Module.
What are the key technical ratings of the IC694PWR330?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC694PWR330 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC694PWR330 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC694PWR330?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The GE Fanuc RX3i IC694PWR330 power supply module is a high-capacity serial expansion power supply module that can run on AC and DC voltage. It needs to be installed in the serial expansion backplane of an RX3i PLC and it can operate with any RX3i CPU. Technical specifications for IC694PWR330 Manufacturer GE Fanuc Series RX3i PacSystems Part Number IC694PWR330 Product Type Power Supply Module Voltage Type AC and DC AC Input Voltage 85 to 264 Volts AC DC Input Voltage 100 to 300 Volts DC Torque Rating 12 Pounds on an Inch (1.3 N-m) Current Rating 2 Amps Fuse Type GE 44A724627-109 Fuse The IC694PWR330 high-capacity serial expansion power supply module is made by GE Fanuc to serve as an expansion power supply for the GE RX3i PacSystems programmable logic controller or PLCs. The IC694PWR330 power supply module can operate with any CPU in the RX3i product series and it can provide up to 30 Watts of additional power to a PLC. When this module is installed in the PLC, it is meant to be installed in the PLCs serial expansion backplane because it is a serial expansion device. Never attempt to install or remove this module from the serial expansion backplane while the power is applied or user injury or component damage may occur. Its current rating is 2 Amps and it uses a GE 44A724627-109 fuse for protection.
The GE Fanuc RX3i IC694PWR330 high-capacity serial expansion power supply module should only be installed in the serial expansion backplane after the backplane’s rack number selection DIP switch has been set properly. The nominal input voltage ratings for this power supply module are 120/240 Volts AC and 125 Volts DC. The IC694PWR330 power supply module cannot support a load-sharing redundancy, but it can support loads of 30 Watts at 5 Volts DC voltage, 20 Watts at 24 Volts DC isolated voltage, and of 15 Watts at 24 Volts DC relay voltage. It can handle a torque level of 12 pounds on an inch or 1.3 N-m. The input voltage ratings of the IC694PWR330 power supply module are 85 to 264 Volts AC and 100 to 300 Volts DC.
Reproduced from the manufacturer's published data.