IC694PSM001
GE
Overview
The IC694PSM001 is a PSM Module from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As a psm module, the IC694PSM001 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC694PSM001, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC694PSM001 (opens in a new tab)
Frequently Asked Questions
What is the IC694PSM001?
The IC694PSM001 is a psm module from GE. It is described by the manufacturer as: PSM Module.
What are the key technical ratings of the IC694PSM001?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC694PSM001 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC694PSM001 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC694PSM001?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The IC694PSM001 replacement PSM module from the GE Fanuc RX3i PacSystem series can monitor 2 indpendent power grids in an RX3i PLC. It can be hot-swapped in the CPU rack on the PLC. Technical specifications for IC694PSM001 Manufacturer GE Fanuc Series RX3i PacSystems Part Number IC694PSM001 Product Type PSM Module Hot Swapping Supported Purpose Monitoring 2 Independent Power Grids DSP Technology Supported Single-Phase Power Systems Supported Wye and Delta 3-Phase Power Systems Supported The GE Fanuc IC694PSM001 module is a replacement PSM module, also known as a Power Sync and Measurement module. It is made by GE Fanuc to be a replacement PSM module for the GE RX3i PacSystems. The purpose of the IC694PSM001 PSM module is to monitor 2 different 3-phase power grids that are independent. It can continuously process 4 current inputs and 3 voltage inputs on each grid through the use of its DSP or Digital Signal Processor technology. This power sync and measurement module measures the RMS power, the RMS voltage, the RMS current, the frequency, and the phase relationships between the phase voltages on both of the power grids. The IC694PSM001 PSM module is compatible with single-phase power systems and with wye-type 3-phase and delta-type 3-phase power systems.
The GE Fanuc RX3i PacSystems IC694PSM001 replacement PSM module is well-suited for applications such as fault monitoring, generator control for synchronizing the power grids and a generator, monitoring and reporting the electrical power consumption, and reducing loads and demand penalty costs. This PSM module connects to a terminal assembly and interface cables to form a complete PSM system. The IC694PSM001 PSM module should always be installed in the main CPU rack or backplane in an RX3i PLC. It supports hot-swapping in an RX3i backplane, that is, this module can be installed in or removed from the backplane while power is applied to the backplane without damaging the module or backplane or injuring the users. RX3i CPUs with firmware version 7.70 or newer are compatible with this PSM module.
Reproduced from the manufacturer's published data.