IC694MDL241
GE
Overview
The IC694MDL241 is an automation component from GE. The IC694MDL241 module is an input module by GE Fanuc. It runs with an input current of 7 milliamps.
Application & Technical Notes
As an automation component, the IC694MDL241 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC694MDL241, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC694MDL241 (opens in a new tab)
Frequently Asked Questions
What is the IC694MDL241?
The IC694MDL241 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC694MDL241?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC694MDL241 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC694MDL241 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC694MDL241?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The IC694MDL241 module is an input module by GE Fanuc. It runs with an input current of 7 milliamps. Technical specifications for IC694MDL241 Brand GE Fanuc Series RX3i PacSystem Part Number IC694MDL241 Description Input module Current 7 milliamps Voltage 24 Volts AC/DC Field to backplane 250 Volts AC Field to frame 1500 Volts AC Power consumption 80 mA at 5 Volts bus voltage Points 16 The IC694MDL241 module is a GE Fanuc-manufactured input module. The module has a current rating of 7 milliamps and it runs with a voltage supply of 24 Volts AC/DC. It is a 16-point input module compatible with the RX3i PLC system. The module helps to interface the PLC system and other input devices, including thumb switches and sensors. This positive/negative input modules are grouped together by using a common input power terminal. The power should be supplied through the backplane. The front section of the IC694MDL241 input module is equipped with 16 different LEDs that are associated with each of the 16 points. Eack LED illuminates green when a connection is made with a specific input. This module is a low-voltage module and it is compact in size. The field to backplane voltage of the module is 250 Volts AC and the frame isolation voltage rating is 1500 Volts AC.
The GE Fanuc RX3i IC694MDL241 16-point input module can be easily connected with different control platforms, input modules, and monitoring devices. The module consumes 80 milliamps of current from the 5 Volts bus from the backplane and it consumes 125 milliamps of current from the isolated 24 Volts bus. This module can be easily installed in any of the I/O slots in the RX3i PLC system. The IC694MDL241 input module uses the Triac output types and no polarity. The module has an active diagnostics system that monitors the module during operation. It can easily detect unwanted system events and alert the operators with alarms. The alarms in the module can be set and adjusted as needed by the operators.
Reproduced from the manufacturer's published data.