IC693MDL390
GE
Overview
The IC693MDL390 is an Output Module from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an output module, the IC693MDL390 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It drives actuators, relays, valves and indicators from controller commands, acting as the actuation layer between logic and the machine.
Key published characteristics include a range 85 – 264VAC (47 to 63 Hz) rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC693MDL390, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC693MDL390 (opens in a new tab)
Frequently Asked Questions
What is the IC693MDL390?
The IC693MDL390 is an output module from GE. It is described by the manufacturer as: Output Module.
What are the key technical ratings of the IC693MDL390?
Its published highlights include range 85 – 264VAC (47 to 63 Hz). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC693MDL390 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC693MDL390 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC693MDL390?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC693MDL390 is a Series 90-30, 120 / 240 VAC Isolated output module. This module is formerly produced by GE Fanuc, now acquired by Emerson Automation. It features five (5) individually isolated discrete output channels that deliver an output voltage range of 85-264 VAC with nominal rated voltages of 120 / 240 VAC and maximum output current of 2.0 Amperes per point; 5 Amperes per module at 45 Degree Celsius and 2 Amperes per module at 60 Degree Celsius. Brand GE Intelligent Platforms/GE Fanuc Series Series 90-30
Specifications
| Output | Voltage Range 85/264 V AC |
|---|---|
| Frequency | 50/60 Hz |
| Output | Voltage Drop 1.5 volt, maximum |
| Output | Leakage 3 mA maximum at 120 volts AC; 6 mA maximum at 240 volts AC |
| Output | Voltage Drop 1.5 Volts maximum |
| Isolation | 1500 volts between field side and logic side; 500 volts between each group |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.