IC693DSM314
GE
Overview
The IC693DSM314 is an automation component from GE. The IC693DSM314 motion control unit is a 4-axis component manufactured by GE Fanuc and it is part of Series 90-30. The unit supports operation in both digital a.
Application & Technical Notes
As an automation component, the IC693DSM314 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC693DSM314, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC693DSM314 (opens in a new tab)
Frequently Asked Questions
What is the IC693DSM314?
The IC693DSM314 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC693DSM314?
Its published highlights include operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC693DSM314 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC693DSM314 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC693DSM314?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The IC693DSM314 motion control unit is a 4-axis component manufactured by GE Fanuc and it is part of Series 90-30. The unit supports operation in both digital and analog modes and it requires less than 5 milliseconds of time for block processing. This control module has a non-volatile storage capacity of 10 programs and 40 subroutines. Technical specifications for IC693DSM314 Brand GE Fanuc Series Series 90-30 Part Number IC693DSM314 Compatible components Programmable logic controllers Operation modes Digital, analog Block processing time Less than 5 milliseconds Number of axis 4 Programming units resolution (position) -536,870,912 to 536,870,911 user units per second Programming units resolution (velocity) 1 to 8,388,607 user units per second Programming units resolution (acceleration) 1 to 1,073,741,823 user units per second Non-volatile storage 10 programs and 40 subroutines Backplane current consumption 450 milliAmps at 5 Volts DC (typical) Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) The IC693DSM314 motion controller is available through Series 90-30 by GE Fanuc. The controller has 4 available axes and it works in both analog and digital modes. This motion controller features a torque mode with a velocity loop of 0.5 milliseconds and it has an improved tracking accuracy due to functions like the velocity feed forward function and the position error integrator function. The IC693DSM314 motion controller also includes local logic, an electronic CAM, simple programming, backplane motion control, and the option of scaling of the programming units by the users. The module is intended for use with programmable logic controllers and it provides support for the different software solutions offered for these components. The IC693DSM314 controller can be configured through either the VersaPro or CIMPLICITY ME software.
The IC693DSM314 motion controller need about 5 milliseconds of time for block processing and it allows for single-point programming. The programming units feature a position of -536,870,912 to 536,870,911 user units per second, a velocity of 1 to +8,388,607 user units per second, and acceleration of 1 to 1,073,741,823 user units per second. The controller unit has non-volatile storage that is enough to store up to 10 programs and 40 subroutines. The typical power consumption for the backplane of similar components from Series 90-30 is 450 milliAmps of current at 5 Volts DC. The IC693DSM314 controller features analog I/O for the connected PLC components and it has 2-position inputs for the capture strobe for every position. The controller must have an operating temperature above 0 Celsius (32 degrees Fahrenheit) and below 60 degrees Celsius (140 degrees Fahrenheit).
Reproduced from the manufacturer's published data.