IC693DSM302
GE
Overview
The IC693DSM302 is an automation component from GE. The GE Fanuc motion controller known as the IC693DSM302 motion controller is part of GE Series 90-30 and it provides additional capabilities for programmable lo.
Application & Technical Notes
As an automation component, the IC693DSM302 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC693DSM302, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC693DSM302 (opens in a new tab)
Frequently Asked Questions
What is the IC693DSM302?
The IC693DSM302 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC693DSM302?
Its published highlights include operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC693DSM302 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC693DSM302 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC693DSM302?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The GE Fanuc motion controller known as the IC693DSM302 motion controller is part of GE Series 90-30 and it provides additional capabilities for programmable logic controllers (PLCs). The unit comes with 2 axes and a serial port for firmware updates. Technical specifications for IC693DSM302 Brand GE Fanuc Series Series 90-30 Part Number IC693DSM302 Compatible components Programmable logic controllers Block processing time Less than 5 milliseconds Number of axis 2 Programming units resolution (position) -8,388,608 to 8,388,607 user units per second Programming units resolution (velocity) 1 to 8,388,607 user units per second Programming units resolution (acceleration) 1 to 134,217,727 user units per second Serial port RS-232 Non-volatile storage 10 programs and 40 subroutines Backplane current consumption 450 milliAmps at 5 Volts DC (typical) Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) The IC693DSM302 motion controller is a Series 90-30 motion controller produced by GE Fanuc. The unit is compatible with PLC components form the same series and it provides high performance and advanced features in regard to machine control and automation applications. The IC693DSM302 controller has 2 axes and it can resolve issues related to communication and operation between different components within the system. The IC693DSM302 motion controller is intended for controlling GE digital servo motors and it includes an integrated digital signal processor that is superior to similar controllers offered by other manufacturers. The IC693DSM302 controller also supports the control of both SL Series analog servos and third-party analog servos. Operation with such a controller requires minimal programming and it allows for the use of external programming devices. The additional programming devices are connected through an included RS-232 serial port which is also used for performing firmware updates.
The GE Series 90-30 IC693DSM302 motion controller features a short block processing time which is less than 5 milliseconds and the related programming units have the following parameters: -8,388,608 to 8,388,607 user units per second for positioning, 1 to 8,388,607 user units per second for the velocity, and 1 to 134,217,727 user units per second for the acceleration. The IC693DSM302 controller comes with an instruction set that allows the users to take full advantage of all its functions and it provides non-volatile storage for up to 10 programs and 40 subroutines. Other features of the IC693DSM302 controller are automatic data transfer, short motion program support, greater tracking accuracy, improved block starting, user scaling, and servo tuning.
Reproduced from the manufacturer's published data.