IC693ACC303
GE
Overview
The IC693ACC303 is an EEPROM card from GE. It is part of GE's industrial automation product portfolio.
Application & Technical Notes
As an eeprom card, the IC693ACC303 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC693ACC303, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC693ACC303 (opens in a new tab)
Frequently Asked Questions
What is the IC693ACC303?
The IC693ACC303 is an eeprom card from GE. It is described by the manufacturer as: EEPROM card.
What are the key technical ratings of the IC693ACC303?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC693ACC303 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC693ACC303 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC693ACC303?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
The IC693ACC303 memory card is an EEPROM card intended for use with micro PLC handheld programmers from Series 90-30 by GE Fanuc. The memory card module supports models 340, 341, and 351 and it has a storage capacity of 32 KB. The card has a write protection option and it features transfer time of 1 minute and 35 seconds. The card is mounted on the memory card slot located on the left side of the host device. Technical specifications for IC693ACC303 Brand GE Fanuc Series Series 90-30 Part Number IC693ACC303 Type EEPROM card Storage capacity 32K Approximate transfer time 1 minute and 35 seconds Compatible components Micro PLC handheld programmers Supported PLC models Model 340, 341 and 351 Functionality Read, write or verify data for configuration and program logic Write protection Yes PLC operating modes Program, protection and data Position of memory card slot Left side of the PLC PLC connection cable length 2 meters (6 feet) Product Lifecycle Status* Discontinued/Obsolete The IC693ACC303 memory card is a type of EEPROM memory card that is used with the programmable logic controllers that are manufactured by GE Fanuc. The supported micro handheld programmers are available through GE Series 90-30 and they are used for variety of applications in different industries. The IC693ACC303 EEPROM memory card can be used for reading, writing, or verifying the data that is necessary for the logic of the program or the adjustment of the device. The GE Fanuc PLCs that use this kind of memory card work in the program mode, protection mode, or data mode, depending on the requirements of the application at hand. The IC693ACC303 memory card has a storage capacity of 32 KB and it can be combined with models labelled with the following numbers: 340, 341, and 351.
The IC693ACC303 memory card is equipped with a write protection switch that can be very helpful and it is inserted into memory slot which is positioned at the left side of the programmable logic controller that hosts it. These PLCs are connected with standard cables that are 2 meters or 6 feet long and it is equipped with a 42-key keypad that makes operation easy and simple. The IC693ACC303 memory card is suitable for storing any kind of data required for the proper operation of the PLC and the data transfer process is simplified. The data types include different statements related to the program logic, registers, and data that are required in order to perform successful configurations for a specific application. The approximate transfer time is 1 minute and 35 seconds. The main purpose of the card is to transfer program logic and configuration of one device to another device.
Reproduced from the manufacturer's published data.