IC670ALG230

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC670ALG230 is an automation component from GE. The IC670ALG230 is an 8-Point Analog Current source input module from the Field control series of GE Fanuc. This module has Eight (8) single-ended input channel.

Application & Technical Notes

As an automation component, the IC670ALG230 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.

Maintenance & Diagnostics

Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC670ALG230, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC670ALG230 (opens in a new tab)

Frequently Asked Questions

What is the IC670ALG230?

The IC670ALG230 is an automation component from GE. It belongs to GE's automation product portfolio.

What are the key technical ratings of the IC670ALG230?

The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.

How is the IC670ALG230 mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC670ALG230 compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC670ALG230?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC670ALG230 is an 8-Point Analog Current source input module from the Field control series of GE Fanuc. This module has Eight (8) single-ended input channels configurable for 0-20 mA / 4-20 mA with digital resolution of 12 bits and analog resolution of 5.0 µAmps. It has typical conversion time of 60 Microseconds per channel. Technical specifications for IC670ALG230

Description

Note	The IC670ALG230 is an analog input module from GE Fanuc. It specifically belongs to the Field I/O control product family of expansion modules that operate with a compatible Bus Interface Unit (BIU). This module primarily features Eight (8) Analog input channels that accepts 0-20 mA and 4-20 mA analog input signals. This module is mainly used for interfacing of field signal transmitters of many types, outputs of panel meters, data loggers, signal splitters, Variable Frequency Drives (VFD) and similar devices. The IC670ALG230 has analog resolution of 5.0 µA while the digital resolution is 12 bits, typical. It accepts a minimum input current of 0.1 mA and maximum of 20 mA. It is built with internal protection features such as open wire detection and over-range fault detection. The IC670ALG230 has built-in analog to digital converter (ADC) circuit which converts the received analog signal to digital format for processing of the host CPU. The ADC circuit has a conversion time of 60 µs per channel at 1 MHz module clock. It also has a 1st order RC input filter with typical transition capacity of 160 Hz. This module has non-linearity of +/- 25% of Full Scale and temperature coefficients of +/–.002% of value per degree C, typical and +/–.005% of value per degree C, maximum. This module comes with a single group of input channels and supports single-ended wiring configuration. Each channel has ground and logic isolation rated 1500 VAC for 1 minute and 250 VAC, continuous. It has a rated current draw of 51 mA, maximum from the BIU power supply. The IC670ALG230 input module is an 8-channel input module manufactured by GE Fanuc. It can run with a common power supply. It is powered with a 24 Volts power supply that also powers the bus interface unit. In case of isolation, a separate power supply is used. The front of the module has LED indicators that show the operation of backplane and the field power. The input module is used to drive different isolated transducers and inputs by using a local power supply. No isolation is present between individual points that are in a group. The isolation to case rating is 250 Volts AC for a continuous time period, and isolation to ground is 1500 Volts AC for a time period of 1 minute. The input impedance of the module is 2.87 kiloohms. The on-state voltage is between 15 Volts DC and 30 Volts DC, and the off-state voltage is between 0 and 5 Volts DC. The response time for powering the IC670ALG230 input module on ranges between 25 and 60 us, and the response time for powering it off ranges between 100 and 150 us. The module draws 100 milliamps of current from the bus interface unit. Output keying is available in this module for mixed inputs and outputs. The input module should be properly grounded for reductions in noise immunity, signal commons, and reference points. The loop-powered transmitters in the module should use the same power supply. The IC670ALG230 input module has an open enclosure design and it is not waterproof. The temperature should be set between 0 and 60 degrees Celsius in a humid environment with 95% maximum non-condensing humidity.

Note

The IC670ALG230 is an analog input module from GE Fanuc. It specifically belongs to the Field I/O control product family of expansion modules that operate with a compatible Bus Interface Unit (BIU). This module primarily features Eight (8) Analog input channels that accepts 0-20 mA and 4-20 mA analog input signals. This module is mainly used for interfacing of field signal transmitters of many types, outputs of panel meters, data loggers, signal splitters, Variable Frequency Drives (VFD) and similar devices. The IC670ALG230 has analog resolution of 5.0 µA while the digital resolution is 12 bits, typical. It accepts a minimum input current of 0.1 mA and maximum of 20 mA. It is built with internal protection features such as open wire detection and over-range fault detection. The IC670ALG230 has built-in analog to digital converter (ADC) circuit which converts the received analog signal to digital format for processing of the host CPU. The ADC circuit has a conversion time of 60 µs per channel at 1 MHz module clock. It also has a 1st order RC input filter with typical transition capacity of 160 Hz. This module has non-linearity of +/- 25% of Full Scale and temperature coefficients of +/–.002% of value per degree C, typical and +/–.005% of value per degree C, maximum. This module comes with a single group of input channels and supports single-ended wiring configuration. Each channel has ground and logic isolation rated 1500 VAC for 1 minute and 250 VAC, continuous. It has a rated current draw of 51 mA, maximum from the BIU power supply. The IC670ALG230 input module is an 8-channel input module manufactured by GE Fanuc. It can run with a common power supply. It is powered with a 24 Volts power supply that also powers the bus interface unit. In case of isolation, a separate power supply is used. The front of the module has LED indicators that show the operation of backplane and the field power. The input module is used to drive different isolated transducers and inputs by using a local power supply. No isolation is present between individual points that are in a group. The isolation to case rating is 250 Volts AC for a continuous time period, and isolation to ground is 1500 Volts AC for a time period of 1 minute. The input impedance of the module is 2.87 kiloohms. The on-state voltage is between 15 Volts DC and 30 Volts DC, and the off-state voltage is between 0 and 5 Volts DC. The response time for powering the IC670ALG230 input module on ranges between 25 and 60 us, and the response time for powering it off ranges between 100 and 150 us. The module draws 100 milliamps of current from the bus interface unit. Output keying is available in this module for mixed inputs and outputs. The input module should be properly grounded for reductions in noise immunity, signal commons, and reference points. The loop-powered transmitters in the module should use the same power supply. The IC670ALG230 input module has an open enclosure design and it is not waterproof. The temperature should be set between 0 and 60 degrees Celsius in a humid environment with 95% maximum non-condensing humidity.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.