IC660TBD110

Overview

The IC660TBD110 is an automation component from GE. The IC660TBD110 Terminal Assembly belongs to the GE Fanuc Genius I/O series of modules. It comes with screw type terminals which accept a single wire with a gau.

Application & Technical Notes

As an automation component, the IC660TBD110 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Key published characteristics include a 93 to 132 Volts AC rating, an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)); do not exceed it during commissioning or in enclosed panels without airflow. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660TBD110, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660TBD110 → (opens in a new tab)

Frequently Asked Questions

Specifications

The IC660TBD110 Terminal Assembly belongs to the GE Fanuc Genius I/O series of modules. It comes with screw type terminals which accept a single wire with a gauge up to AWG #14. It acts as the wiring base for various field control I/O modules. This module is slotted to allow for the keying of the compatible electronics assembly. It operates reliably in an ambient temperature range from 0 to 60 degrees Celsius. It offers an EEPROM unit that can be used to store the configuration details of an application. The IC660TBD110 Terminal Assembly is a box style module which comes with a compact design. It ensures a simple wiring process to provide reduced wiring and installation costs. The IC660TBD110 Terminal Assembly is specifically designed for use with an IC660BBD110 input block and an IC660EBD110 electronics assembly. Terminals 5 to 32 are reserved for connecting the field devices to the block. Terminals 1 and 2 can be used for connecting serial devices and Terminals 3 and 4 are reserved for shield in and shield out connections, respectively. The approximate weight of the IC660TBD110 Terminal Assembly is 2 pounds. The minimum recommended size for the wires is AWG #20. It accepts a 115 Volts AC source as the power supply. During the power supply wiring, connect the positive side of the source to the H terminal and the neutral to the N terminal. The configuration settings such as the device number, baud rate, input filter time, and reference address are stored inside the terminal assembly. The permanent bus connections can be made directly to the terminal assembly. In order to remove the terminal assembly while maintaining the integrated data on the bus, an intermediate connector must be used. The IC660TBD110 terminal assembly belongs to the Genius I/O series. The assembly includes a block with 16 circuits and it is intended only for inputs. The assembly features an operating voltage range of 93 to 132 Volts AC and a frequency of 47 to 63 Hertz. Technical specifications for IC660TBD110 Brand GE Fanuc Series Genius I-O

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1