IC660TBA105
GE
Overview
The IC660TBA105 is an automation component from GE. The GE Fanuc IC660TBA105 terminal assembly from the GE Genius I/O product line. This terminal assembly comes with 6 outputs which are current-source outputs. In.
Application & Technical Notes
As an automation component, the IC660TBA105 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include a 93 to 132 Volts AC / 105 to 145 Volts DC rating, an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Respect the published operating temperature window (0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)); do not exceed it during commissioning or in enclosed panels without airflow. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC660TBA105, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC660TBA105 (opens in a new tab)
Frequently Asked Questions
What is the IC660TBA105?
The IC660TBA105 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC660TBA105?
Its published highlights include 93 to 132 Volts AC / 105 to 145 Volts DC, operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC660TBA105 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC660TBA105 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC660TBA105?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The GE Fanuc IC660TBA105 terminal assembly from the GE Genius I/O product line. This terminal assembly comes with 6 outputs which are current-source outputs. In a Genius I/O system, the IC660TBA105 terminal assembly is connected to an electronics assembly in order to operate. However, the IC660TBA105 terminal assembly and the compatible Genius I/O series electronics assembly are sold separately. This terminal assembly weighs 4 pounds (1.8 kilograms) and its dimensions are 8.8 x 3.5 x 3.9 inches (22.4 x 8.9 x 10 centimeters). It supports a block to block isolation voltage rating of 1500 Volts for up to 1 minute. The IC660TBA105 terminal assembly dissipates 12 Watts of maximum heat during operation. The GE Fanuc IC660TBA105 Genius I/O terminal assembly is rated for both 115 Volts AC voltage and 125 Volts DC. When it is assembled with its compatible electronics assembly, the IC660TBA105 terminal assembly is the part of the complete component that hosts all of the wiring connections both for itself and for the electronics assembly. This means that it is easy to remove or replace the electronics assembly because the electronics assembly can be removed or replaced with disconnecting any of the wiring that is connected to the terminal assembly. The IC660TBA105 terminal assembly can operate in a temperature range from 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius), and it can be stored in a temperature range from -40 to 212 degrees Fahrenheit (-40 to 100 degrees Celsius). It can tolerate 5 to 95% relative humidity without condensation in both operation and storage. The IC660TBA105 terminal assembly is made by GE Fanuc and it has 6 current-source outputs. The assembly has an intended voltage of 115 Volts AC or 125 Volts DC and a power supply voltage range of 93 to 132 Volts AC or 105 to 145 Volts DC. Technical specifications for IC660TBA105 Brand GE Fanuc Series Genius I-O
Specifications
| Power Supply | Voltage 93 to 132 Volts AC / 105 to 145 Volts DC |
|---|---|
| Power Supply | Dropout Time 1 cycle (AC) / 10 milliseconds (DC) |
| Dimensions | (HxWxD) 224 x 88 x 100 millimeters (8.8 x 3.5 x 3.9 inches) |
| Weight | 1.8 kilograms (4 pounds) |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Storage Temperature | -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit) Description |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.