IC660EPM100

Overview

The IC660EPM100 is an automation component from GE. This is only the Electronic Assembly - the Terminal Block (IC660TBM100) is sold seperatly or see the IC660BPM100 for a complete assembly.

Application & Technical Notes

As an automation component, the IC660EPM100 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Key published characteristics include an operating temperature range of 0 to +60 Degree Celsius (+32F to +140 Degree Fahrenheit). These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (0 to +60 Degree Celsius (+32F to +140 Degree Fahrenheit)); do not exceed it during commissioning or in enclosed panels without airflow. Avoid condensation — the rated humidity is 5% to 95%, non-condensing; store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660EPM100, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660EPM100 → (opens in a new tab)

Frequently Asked Questions

Specifications

This is only the Electronic Assembly - the Terminal Block (IC660TBM100) is sold seperatly or see the IC660BPM100 for a complete assembly. IC660EPM100 is a Genius Power Track Block that used in different types of industrial and power monitoring applications. The IC660EPM100 power block automatically provides the operator with displays on a Genius handheld monitor. The IC660EPM100 power supply accepts either 115/230 VAC or 125 VDC inputs. Its software can be configured by the host or via the handheld monitor (HHM).A IC660EPM100 monitors current and voltage inputs and stores digitized waveform values for each input. IC660EPM100 calculates kilowatt hours, current, active power, RMS voltage, reactive power, and power factor from the digitized waveform values. Calculated data is then automatically sent by the IC660EPM100 to a host PLC or computer approximately two times per second. The Genius HHM can also display the same data, either locally or from any connection point on the bus. The IC660EPM100 can couple with a delta configured 3-phase power system or with a single phase power system. IC660EPM100 accepts voltage inputs from 1-3 potential transformers and current inputs from up to three line current transformers, plus a neutral current transformer. The IC660EPM100 can be installed on a Genius bus up to 7500 feet from the host computer or PLC. It can be used in stand-alone applications without a host. IC660EPM100 has a terminal assembly and an electronics assembly. The terminal assembly is where all fixed wiring is attached. The electronics assembly can be inserted or removed without disturbing configuration of the block. Inputs from transformers, both current and potential, are wired to the terminal assembly. The terminal assembly is mounted permanently. LEDs on the front of the electronics assembly indicate the status of the block and the communications bus. This location is also home to a convenient connector for the HHM. The IC660EPM100 is a PowerTrac Block Electronics Module that is part of the Genius I/O series, formerly by GE Fanuc now under Emerson Automation. This module is used with the PowerTrac terminal base to form the PowerTrac block with catalog number IC660BPM100. This electronics assembly lay be used as a replacement to an existing electronics assembly without dismantling the existing I/O termination. Technical specifications for IC660EPM100 Brand GE Fanuc Series Genius I-O

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1