IC660ELB921

Overview

The IC660ELB921 is an automation component from GE. The IC660ELB921 is a Single Slot PCIM Card manufactured for use with the Genius LAN interface by GE Fanuc. IC660ELB921 also serves as an entry point into the Ge.

Application & Technical Notes

As an automation component, the IC660ELB921 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Key published characteristics include an operating temperature range of 0 to 60 degrees Celsius. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (0 to 60 degrees Celsius); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within –40 to +70 C(–40 to 158 F). Avoid condensation — the rated humidity is 5-95% (non-condensing); store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660ELB921, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660ELB921 → (opens in a new tab)

Frequently Asked Questions

Specifications

The IC660ELB921 is a Single Slot PCIM Card manufactured for use with the Genius LAN interface by GE Fanuc. IC660ELB921 also serves as an entry point into the Genius I/O System for the IBM PC/AT/XT family. IC660ELB921 is fully compatible with a handheld monitor and may be used with any GE Fanuc Genius bus controller. For logic power, the IC660ELB921 PCIM requires a 5V DC source. IC660ELB921 uses 8,000 input and 8,000 output locations. When the IC660ELB921 card is configured as input-only, it can only read Genius block information. If the configuration of the card is set as output-only, then it can only write to Genius block outputs. It is important to note that unlike its counterpart IC660ELB922, PCIM IC660ELB921 is marketed with only one daughterboard that provides a convenient method to control devices on the Genius serial bus. Tasks are controlled accordingly during the initialization process, managing errors for a minimum of 30 bus devices. Since this PCIM is an AT-type board, it is easier for IC660ELB921 to be integrated into a user-developed microprocessor system. In all levels mechanical, electrical, and communication timings, IC660ELB922 is fully compatible with all Genius protocols. Additionally, its daughterboard provides low cost tap on any Genius FE I/O bus. In return, this lets the host system manage I/O by utilizing the broad diagnostics, high consistency, and noise protection of the Genius I/O System. The daughterboard may be configured independently due to the configuration software supplied with the IC660ELB921 PCIM. The IC660ELB921 is a single slot PC Interface module (PCIM). This module enables the connection of the host computer to the Genius I/O Bus, allowing monitoring and control functions of Genius I/O devices over the network. It supports the installation of a single daughtercard with catalog number IC660ELB912. This module has a memory requirement of 4 bytes and is mounted to an ISA-compatible slot of the host PC. New Available Request a quote Fast response New Surplus Available Request a quote Fast response Surplus New Available Request a quote Fast response Brand GE Fanuc Series Genius I/O

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1