IC660EBD110

Overview

The IC660EBD110 is an Electronic Assembly in the Genius I/O range from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As an electronic assembly, the IC660EBD110 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Key published characteristics include a 93 to 132 V AC rating, an operating temperature range of 0 Degree to 60 Degree Celsius. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (0 Degree to 60 Degree Celsius); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within of -40 Degree Celsius to 100 Degree Celsius. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660EBD110, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660EBD110 → (opens in a new tab)

Frequently Asked Questions

Specifications

The GE Fanuc IC660EBD110 Genius I/O Electronic Assembly Block is a 16-circuit discrete I/O block that has been designed for the GE Genius I/O control system. The IC660EBD110 Electronic Assembly, like all Genius I/O devices, offers a microprocessor-configured interface to 115 Volts AC-rated discrete input sensors. The IC660EBD110 Electronic Assembly provides sixteen 115 Volt AC input circuits that are arranged in 2 banks of 8 inputs each, and each input terminal comes with a contact closure type that supports wiring to switches, pushbuttons, or limit switches. The IC660EBD110 Electronic Assembly is designed to support both 2-wire and 3-wire proximity switch inputs, and its control power is supplied by the same line power that supplies every input, thereby eliminating the need for an additional power supply. The IC660EBD110 Electronic Assembly offers built-in configurable fault detection features that are capable of detecting open-wire and shorted wire faults within the block’s circuitry and it also offers programmable thresholds that can extend these built-in diagnostic features (open-wire and shorted wire faults) to circuits with a wide range of sensors and input devices. Each of the IC660EBD110 Electronic Assembly’s input groups has a separate ON/OFF threshold that can be programmed anywhere between 25% and 85% of the incoming line voltage, thus extending its use with a wide range of input sensors. Additionally, every input can be programmed to detect short circuit faults at 10% to 90% of the incoming line voltage. The IC660EBD110 Electronic Assembly is supplied as an assembly consisting of a 16-point input block (the IC66-BBD110) and a terminal (the IC66-TBD110), which provides a simplified wiring base for all of the block’s wiring. The IC660EBD110 Electronic Assembly has an operating voltage range of 93 to 132 Volts AC (at 47 to 63 Hertz) and a maximum block current of 80 milliamps. The IC660EBD110 is a component of the Genius Block I/O module from GE Fanuc Automation now under Emerson Automation. This component is an electronic assembly that is used to form a Genius I/O module, particularly paired with IC660TBD110 terminal base to form the IC660BBD110, 93-132 VAC 16-channel discrete input Block. Technical specifications for IC660EBD110 Brand GE Intelligent Platforms/GE Fanuc Series Genius I-O

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1

Compare with related modules

• GE Genius I/O & Field Control — IC660 Series Compared (Set 2)