IC660CBB902
GE
Overview
The IC660CBB902 is an automation component from GE. Series Six Genius I/O Bus Controller GE Fanuc Series 6 to Genius Block IC660 IC660CB IC660CBB The GE Fanuc IC660CBB902 Series 6 PLC Bus Controller is for the Se.
Application & Technical Notes
As an automation component, the IC660CBB902 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Specific electrical and mechanical ratings depend on the exact configuration and suffix of the part; the original datasheet should be consulted for the definitive specification.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC660CBB902, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC660CBB902 (opens in a new tab)
Frequently Asked Questions
What is the IC660CBB902?
The IC660CBB902 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC660CBB902?
The definitive ratings depend on the exact configuration; consult the original datasheet or the source PDF linked on this page for the complete table.
How is the IC660CBB902 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC660CBB902 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC660CBB902?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications (source data)
Series Six Genius I/O Bus Controller GE Fanuc Series 6 to Genius Block IC660 IC660CB IC660CBB The GE Fanuc IC660CBB902 Series 6 PLC Bus Controller is for the Series 6 PLC System. This module can be installed in any CPU slots, in regular/high-capacity I/O racks, or in a remote I/O rack, and it can accommodate a maximum of 31 I/O devices including a handheld monitor, Genius I/O blocks, and interface devices. Technical specifications for IC660CBB902 Brand GE Fanuc Series Genius I-O Part Number IC660CBB902 Description Series 6 PLC Bus Controller Application Series 6 PLC System Configuration CPU or Handheld Monitor Max I/O Capacity 31 I/O Devices Phase Type B Baud Rate Selectable Except for the 153.6 Kilobaud Standard Rate Max Connection Distance 2000 Feet Compatible I/O Block Genius I/O Block with over 64 Input/Output Bits Built-in Diagnostics Yes Location CPU Slot, Remote I/O Rack, or High-Capacity I/O Rack Description The GE Fanuc IC660CBB902 Series 6 Bus Controller is a Series 6 PLC bus controller. This device interfaces the Series 6 PLC to the Genius I/O serial bus. A Genius I/O serial bus can accommodate a maximum of 31 I/O devices on the bus, including Genius I/O blocks, interface modules, and hand-held monitors. It also supports a wide range of Genius I/O blocks, and it can be used for configured communication between a Series 6 PLC and the Genius I/O devices connected on the bus. The IC660CBB902 Bus Controller belongs to the Phase B enhanced bus controller family. It is suitable for busses which use any baud rates aside from the 153.6 Kilobaud standard rate and with a maximum connection distance less than 2000 feet. The IC660CBB902 Bus Controller is also compatible with busses that have Resistive Temperature Detector (RTDs) blocks or Genius I/O blocks with more than 64 I/O bits, Series 6 PLC systems with CPU to CPU communication, and systems with bus redundancy.
The GE Fanuc IC660CBB902 Bus Controller comes with built-in diagnostics capabilities that automatically send out diagnostic reports from Genius I/O blocks on the bus to the CPU. The IC660CBB902 Bus Controller can be installed in any I/O slot of the Series 6 CPU, in a regular or high-capacity I/O rack, or in a remote I/O rack (although this is not recommended). The IC660CBB902 Bus Controller has 2 LED status indicators (the "BOARD OK" LED and the "COMM OK" LED) and a handheld monitor connector for access to all the devices that are installed on the bus. The IC660CBB902 Bus Controller also has 4 upper terminals for serial bus connections and low connector jumpers (JP1, JP2, and JP3) for the terminations of the Genius I/O bus.
Reproduced from the manufacturer's published data.