IC660BBD110

AI-generated · verify with manufacturerLast reviewed 2026-09-29

Overview

The IC660BBD110 is a Discrete Input Block from GE. It is part of GE's industrial automation product portfolio.

Application & Technical Notes

As a discrete input block, the IC660BBD110 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It converts field signals (sensors, switches, transmitters) into the digital or analogue values the controller processes, forming the acquisition layer of the automation scheme.

Key published characteristics include a Range 93-132 VAC rating, an operating temperature range of 32 to 140 degrees Fahrenheit. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (32 to 140 degrees Fahrenheit); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within -40 to 212 degrees Fahrenheit. Verify field wiring, shielding and grounding at installation; check terminal torque and confirm signal types match the configured range. Periodically inspect for loose terminations, induced noise and channel-level diagnostics reported by the controller. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660BBD110, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm the module matches your GE product portfolio rack, the required channel count, signal type and voltage, and the firmware/configuration of the controller. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660BBD110 (opens in a new tab)

Frequently Asked Questions

What is the IC660BBD110?

The IC660BBD110 is a discrete input block from GE. It is described by the manufacturer as: Discrete Input Block.

What are the key technical ratings of the IC660BBD110?

Its published highlights include Range 93-132 VAC, operating temperature 32 to 140 degrees Fahrenheit. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.

How is the IC660BBD110 mounted or installed?

Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.

Is the IC660BBD110 compatible with my controller?

It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.

What should I check before buying the IC660BBD110?

Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.

Specifications

The IC660BBD110 is a low leakage, discrete input block weighting 4 lbs., manufactured by GE Fanuc. It comes with 16 points and is rated 115 Volt AC with an input and operating voltage range of 93-132 VAC and a frequency of 47-63 Hz. This block has a storage temperature range of -40 degrees Celsius to +100 degrees Celsius.

Description

Note	The GE Fanuc IC660BBD110 is a stand-alone block I/O that features Sixteen (16) input points. This module supports the Genius bus communication protocol, allowing it be installed near machines without the need of a baseplate, processor or communication adapter installed along the module. This module is an intelligent input module that supports daisy-chain topology and reports directly to a controller or communication adapter connected to the same network. The IC660BBD110 input channels are designed to receive signal voltage range of 93-132VAC with frequency of 47-63 Hz with nominal value of 115VAC. It has a programmable threshold of 25% to 85% for both ON and OFF states. This module is also equipped with internal channel diagnostics, capable of detecting open and shorted wire. Both diagnostic properties also have programmable thresholds of 25% - 85% and fixed threshold of 10-90%, respectively. This module exhibits an input processing tume of 1 ms with software configurable input filters of 10 to 100 ms, in 10 ms increments. This input filter allow rejection of noise and signal bounces. The IC660BBD110 module measures 8.83” (22.44cm) x 3.34” (8.48cm) x 3.91” (9.93cm) (HxWxD) and weighs 4 lbs. (1.8 kg). It comes with LED indicators such as Unit OK, I/O enabled and individual input LEDs. It has internal isolation of 1500V from ground to serial bus. The IC660BBD110 connects to the Genius Bus via the terminal block installed below the module’s LED indicators. This terminal is a 3-pin terminal that may be accessed by opening the hinged door. This module may be installed in right-side up or upside-down orientation. The IC660BBD110 discrete input block comes with advanced diagnostics and selectable thresholds. Some of the most common input connection contact closure connections with devices like switches, limit switches, and pushbuttons. It can make connections with 2-wire proximity switch inputs and 3-wire proximity switch inputs. The GE Fanuc Genius I-O IC660BBD110 discrete input block operates safely and at full power in a temperature range of 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius), and it can be stored safely in an environment with a temperature range of -40 to 212 degrees Fahrenheit (-40 to 100 degrees Celsius.) The safe ambient humidity levels for the IC660BBD110 discrete input block in operation and in storage are between 5 and 95%, non-condensing. This input block weighs 4 pounds or 1.8 kilograms. It measures 8.8 x 3.3 x 3.9 inches (22.4 x 8.4 x 9.9 centimeters). For device protection, the IC660BBD110 discrete input block can be configured by software to detect shorted wire faults and open wire faults.

Note

The GE Fanuc IC660BBD110 is a stand-alone block I/O that features Sixteen (16) input points. This module supports the Genius bus communication protocol, allowing it be installed near machines without the need of a baseplate, processor or communication adapter installed along the module. This module is an intelligent input module that supports daisy-chain topology and reports directly to a controller or communication adapter connected to the same network. The IC660BBD110 input channels are designed to receive signal voltage range of 93-132VAC with frequency of 47-63 Hz with nominal value of 115VAC. It has a programmable threshold of 25% to 85% for both ON and OFF states. This module is also equipped with internal channel diagnostics, capable of detecting open and shorted wire. Both diagnostic properties also have programmable thresholds of 25% - 85% and fixed threshold of 10-90%, respectively. This module exhibits an input processing tume of 1 ms with software configurable input filters of 10 to 100 ms, in 10 ms increments. This input filter allow rejection of noise and signal bounces. The IC660BBD110 module measures 8.83” (22.44cm) x 3.34” (8.48cm) x 3.91” (9.93cm) (HxWxD) and weighs 4 lbs. (1.8 kg). It comes with LED indicators such as Unit OK, I/O enabled and individual input LEDs. It has internal isolation of 1500V from ground to serial bus. The IC660BBD110 connects to the Genius Bus via the terminal block installed below the module’s LED indicators. This terminal is a 3-pin terminal that may be accessed by opening the hinged door. This module may be installed in right-side up or upside-down orientation. The IC660BBD110 discrete input block comes with advanced diagnostics and selectable thresholds. Some of the most common input connection contact closure connections with devices like switches, limit switches, and pushbuttons. It can make connections with 2-wire proximity switch inputs and 3-wire proximity switch inputs. The GE Fanuc Genius I-O IC660BBD110 discrete input block operates safely and at full power in a temperature range of 32 to 140 degrees Fahrenheit (0 to 60 degrees Celsius), and it can be stored safely in an environment with a temperature range of -40 to 212 degrees Fahrenheit (-40 to 100 degrees Celsius.) The safe ambient humidity levels for the IC660BBD110 discrete input block in operation and in storage are between 5 and 95%, non-condensing. This input block weighs 4 pounds or 1.8 kilograms. It measures 8.8 x 3.3 x 3.9 inches (22.4 x 8.4 x 9.9 centimeters). For device protection, the IC660BBD110 discrete input block can be configured by software to detect shorted wire faults and open wire faults.

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.