IC660BBD022

Overview

The IC660BBD022 is an automation component from GE. The IC660BBD022 is a 24 VDC Source I/O, 16 Circuit, 2/3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is among the discrete and analog blocks t.

Application & Technical Notes

As an automation component, the IC660BBD022 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.

Key published characteristics include a 18-30VDC rating, an operating temperature range of 0 Degree to 60 Degree Celsius. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.

Maintenance & Diagnostics

Respect the published operating temperature window (0 Degree to 60 Degree Celsius); do not exceed it during commissioning or in enclosed panels without airflow. For storage and transit, keep the unit within of -40 Degree Celsius to 100 Degree Celsius. Avoid condensation — the rated humidity is 5-95% non-condensing; store and operate the module in a dry, pollution-degree-appropriate enclosure. Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.

Sourcing & Procurement

When sourcing the IC660BBD022, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.

Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.

Check live stock, lead time and request a quote for IC660BBD022 → (opens in a new tab)

Frequently Asked Questions

Specifications

The IC660BBD022 is a 24 VDC Source I/O, 16 Circuit, 2/3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is among the discrete and analog blocks that belong to this series. It works with 24 VDC and is used with two and three wire solid state sensors and electromechanical sensors. Each of the 16 circuits, the block can work as an input, output, or tristate input, and no other components are required for configuration. Power supply is provided to all circuits by the block. The IC660BBD022 has various configurable features. Among these are output test capability, selectable input time filter, output power up defaults, and output hold last state or default. The block has the ability to protect the system in case of electronic short circuit and over temperature. It can detect a failed switch, no load, and open wire in tristate inputs. In case there is overload, it detects the problem and shuts down. This block can replace all its previous versions when a compatible electronics assembly is connected. The block should be installed in a protective case in a location with no airborne contaminants alongside adequate cooling and air flow. IC660BBD022 needs a reliable grounding system. Terminals of this block interface with #12 wire or two #14 wires. There are 22 terminals on this block. The serial bus connects 1 to 4, and terminals 6 to 21 can be used as inputs or outputs by selecting the DC+ or DC- side of the terminal. DC power connects to terminals 5 and 22. When replacing an electronics assembly, the user must be careful because there is danger of electrical shock. The IC660BBD022 is a Genius Block I/O module that is formerly produced by GE Fanuc Automation now under Emerson Automation. This module features Sixteen (16) sourcing I/O circuits configurable as input or output. Input circuits are designed to accept nominal input signal voltages of 24 / 48 VDC at an input current processing time of 1.7 ms. Output circuits are designed to deliver an Technical specifications for IC660BBD022 Brand GE Fanuc Series Genius I/O

Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.

Related GE parts

• 369B1841G0131
• 369B1842G0013
• 369B1859G0018
• 369B1868G0008
• 369B1871G0007
• 531X111PSHAPG2
• 531X111PSHARG3
• 531X121PCRALG1