IC660BBD020
GE
Overview
The IC660BBD020 is an automation component from GE. The IC660BBD020 is 24/48 VDC Source I/O, 16 Circuit, 3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is a configurable block that interfaces 3-.
Application & Technical Notes
As an automation component, the IC660BBD020 is intended for deployment in panel-based control cabinets and machine enclosures where the GE product portfolio equipment is installed. It performs a defined automation function within the control system and is selected to match the installed GE platform.
Key published characteristics include a 18-56 VDC rating. These values should be confirmed against the current manufacturer datasheet before final selection, as options and suffixes vary by configuration.
Maintenance & Diagnostics
Inspect terminals and connectors for corrosion or looseness, and confirm the module seats correctly in its carrier. Always de-energise the circuit and follow lock-out/tag-out before handling; refer to the official instruction bulletin for service procedures.
Sourcing & Procurement
When sourcing the IC660BBD020, distinguish three supply tiers: (1) genuine GE stock from an authorised distributor; (2) compatible equivalents or surplus/NOS (new-old-stock) from third parties; (3) alternative parts offering equivalent function. Genuine supply carries the full warranty and traceability; compatible or alternative items may be cheaper but should be validated for form, fit, firmware and certification before use in a live system. PLCXpert publishes this page as an independent reference and does not sell the part — verify every claim with the manufacturer or your distributor.
Confirm mechanical and electrical compatibility with your GE product portfolio installation and the intended function. Lead times and pricing vary by region and lifecycle status; obtain a current quote from an authorised channel rather than relying on stale listings.
Check live stock, lead time and request a quote for IC660BBD020 (opens in a new tab)
Frequently Asked Questions
What is the IC660BBD020?
The IC660BBD020 is an automation component from GE. It belongs to GE's automation product portfolio.
What are the key technical ratings of the IC660BBD020?
Its published highlights include 18-56 VDC. Full electrical, mechanical and environmental limits are listed in the manufacturer datasheet and should be confirmed for your exact suffix.
How is the IC660BBD020 mounted or installed?
Installation follows the standard GE product portfolio mounting practice for this device class; refer to the installation manual for exact dimensions and torque.
Is the IC660BBD020 compatible with my controller?
It belongs to GE's automation product portfolio. Confirm the specific rack, firmware revision, slot rules and configuration with the controller documentation before purchase, as compatibility depends on the exact system build.
What should I check before buying the IC660BBD020?
Verify the genuine part number and suffix, confirm it matches your platform and ratings, check the current lifecycle/availability status, and buy from an authorised distributor. PLCXpert provides this reference only and does not sell the component.
Specifications
The IC660BBD020 is 24/48 VDC Source I/O, 16 Circuit, 3 Wire Sensor Compatible Block of GE Fanuc series 90-30 PLCs. It is a configurable block that interfaces 3-wire solid state and electromechanical sensors. This block works with 24 or 48 VDC and provides current to output devices only. The IC660BBD020 has 16 discrete circuits. Each of them can be configured as input, tristate input, or output with different parameters and features. It also has advanced diagnostic capabilities. It can detect installation problems or run-time errors. It reports them to the handheld monitor and takes appropriate corrective action. Some of them are short circuit, over temperature, failed switch, open wire, overload, or no load diagnostic. The IC660BBD020 is compatible with Terminal Assembly IC66*TSD020 version C or later. It is not compatible with any version of IC66*ELD020 or IC66*EBD020 versions A to E Electronics Assemblies. However, these assemblies can get an upgrade to work with IC660BBD020. Any handheld monitor can be used with this block except for IC66*HHM501, which requires some configuration. The IC660BBD020 has some installation restrictions. For example, it must be installed in areas that are clean and free of airborne contaminants and with adequate cooling airflow. It can be mounted right-side up or upside down. Emphasis should be given to grounding due to the block’s mounting screws. A reliable ground system using a short wire lead is necessary. The IC660BBD020 is a Genius Block I/O. Previously manufactured by GE Fanuc, this module is now under Emerson Automation. It is a 16-channel Source I/O block with channels configurable as input and output, independently that accepts 24 VDC / 48 VDC input signal and deliver 24 VDC / 48 VDC signals. It is compatible for use with 3-wire sensors, electromechanical relays and other Technical specifications for IC660BBD020 Brand GE Fanuc Series Genius I/O
Specifications
| Compatibility | 90-30 PLCs |
|---|---|
| Input | Impedance 1.7 ms with filter |
| Temperature | 0-60 degrees Celsius |
| Input | Response time 1.7 msec plus configurable filter |
Reproduced from the manufacturer's published data. Values marked "Not available" are absent from the source document.